何故かPerl5.34をコンパイルしている

p5.34-dbiのコンパイルができない理由が判明。
Perl5.34がXcode（それも古いの）で作られていたからだった。

なので、ソースを展開してConfigureを弄り、GeminiさんAIさんに聞きつつ、MacPortsのclang（clang-16）を使えと只管質問に答えていった。
ここに延々と続くログを残す。（嫌がらせレベルである）

% sudo ./Configure
 
Beginning of configuration questions for perl5.
 
Checking echo to see how to suppress newlines...
...using \c
The star should be here-->*
 
First let's make sure your kit is complete.  Checking...
Looks good...
 
Would you like to see the instructions? [n] 
 
Locating common programs...
awk is in /usr/bin/awk.
cat is in /bin/cat.
chmod is in /bin/chmod.
comm is in /usr/bin/comm.
cp is in /bin/cp.
echo is in /bin/echo.
expr is in /bin/expr.
grep is in /usr/bin/grep.
ls is in /bin/ls.
mkdir is in /bin/mkdir.
rm is in /bin/rm.
sed is in /usr/bin/sed.
sort is in /usr/bin/sort.
touch is in /usr/bin/touch.
tr is in /usr/bin/tr.
uniq is in /usr/bin/uniq.
 
Don't worry if any of the following aren't found...
ar is in /opt/local/bin/ar.
bison is in /opt/local/bin/bison.
I don't see byacc out there, offhand.
cpp is in /usr/bin/cpp.
csh is in /bin/csh.
date is in /bin/date.
egrep is in /usr/bin/egrep.
gmake is in /opt/local/bin/gmake.
gzip is in /opt/local/bin/gzip.
less is in /usr/bin/less.
ln is in /bin/ln.
make is in /usr/bin/make.
more is in /usr/bin/more.
nm is in /opt/local/bin/nm.
nroff is in /usr/bin/nroff.
perl is in /opt/local/bin/perl.
I don't see pg out there, either.
test is in /bin/test.
uname is in /usr/bin/uname.
zip is in /usr/bin/zip.
Substituting less -R for less.
Using the test built into your sh.
 
Checking compatibility between /bin/echo and builtin echo (if any)...
They are compatible.  In fact, they may be identical.
The following message is sponsored by

  Dresden.pm<--The stars should be here.

Dear Perl user, system administrator or package
maintainer, the Perl community sends greetings to
you. Do you (emblematical) greet back [Y/n]? n

 
Symbolic links are supported.
 
Checking how to test for symbolic links...
You can test for symbolic links with 'test -h'.
Checking for cross-compile
No targethost for running compiler tests against defined, running locally
 
Good, your tr supports [:lower:] and [:upper:] to convert case.
Using [:upper:] and [:lower:] to convert case.
 
I see a config.sh file.  Shall I use it to set the defaults? [y] 
Fetching default answers from your old config.sh file...

Configure uses the operating system name and version to set some defaults.
The default value is probably right if the name rings a bell. Otherwise,
since spelling matters for me, either accept the default or answer "none"
to leave it blank.

Operating system name? [darwin] 
 
Operating system version? [17.7.0] 

By default, perl5 will be installed in /opt/local/bin, manual pages
under /opt/local/man, etc..., i.e. with /opt/local as prefix for all
installation directories. Typically this is something like /usr/local.
If you wish to have binaries under /usr/bin but other parts of the
installation under /usr/local, that's ok: you will be prompted
separately for each of the installation directories, the prefix being
only used to set the defaults.

Installation prefix to use? (~name ok) [/opt/local] 
 
AFS does not seem to be running...

In some special cases, particularly when building perl5 for distribution,
it is convenient to distinguish the directory in which files should be
installed from the directory (/opt/local) in which they will
eventually reside.  For most users, these two directories are the same.

What installation prefix should I use for installing files? (~name ok)
[/opt/local] 

Perl can be built to offer a form of threading support on some systems
To do so, Configure can be run with -Dusethreads.

Note that Perl built with threading support runs slightly slower
and uses slightly more memory than plain Perl.

If this doesn't make any sense to you, just accept the default 'n'.
Build a threading Perl? [n] 

Perl can be built so that multiple Perl interpreters can coexist
within the same Perl executable.
 
If this doesn't make any sense to you, just accept the default 'n'.
Build Perl for multiplicity? [n] 
 
Use which C compiler? [/opt/local/bin/clang] 
 
Hmm...  Looks kind of like a BSD system, but we'll see...
 
Congratulations.  You aren't running Eunice.
 
It's not Xenix...
 
Nor is it Venix...
 
Checking for GNU cc in disguise and/or its version number...
You are using GNU cc Clang 16.0.6.
 
Hmm...  Doesn't look like a MIPS system.
 
Now, how can we feed standard input to your C preprocessor...
You used to use /opt/local/bin/clang  -no-cpp-precomp -E - so we'll use that again.
(And we'll use /opt/local/bin/clang  -no-cpp-precomp -E - to preprocess directly.)

Some systems have incompatible or broken versions of libraries.  Among
the directories listed in the question below, please remove any you
know not to be holding relevant libraries, and add any that are needed.
Say "none" for none.

Directories to use for library searches?
[/opt/local/lib /opt/local/libexec/llvm-16/lib/clang/16/lib /usr/local/lib /usr/lib] 

On some systems, shared libraries may be available.  Answer 'none' if
you want to suppress searching of shared libraries for the remainder
of this configuration.

What is the file extension used for shared libraries? [dylib] 

Some dynamic loaders assume that the *basename* of shared library filenames
are globally unique.  We'll default this to undef as we assume your system
is not this weird. Set to defined if you're on one of them.

Make shared library basenames unique? [n] 

Perl can be built to use the SOCKS proxy protocol library.  To do so,
Configure must be run with -Dusesocks.  If you use SOCKS you also need
to use the PerlIO abstraction layer, this will be implicitly selected.

If this doesn't make any sense to you, just accept the default 'n'.
Build Perl for SOCKS? [n] 

Perl can be built to take advantage of long doubles which
(if available) may give more accuracy and range for floating point numbers.

If this doesn't make any sense to you, just accept the default 'n'.
Try to use long doubles if available? [n] 
 
Checking for optional libraries...
No -lcl.
Found -lpthread (shared).
No -lsocket.
No -lbind.
No -linet.
No -lnsl.
No -lndbm.
Found -lgdbm (shared).
Found -ldbm (shared).
No -ldb.
No -lmalloc.
Found -ldl (shared).
No -lld.
No -lsun.
Found -lm (shared).
No -lcrypt.
No -lsec.
Found -lutil (shared).
Found -lc (shared).
No -lcposix.
No -lposix.
No -lucb.
No -lbsd.
No -lBSD.

In order to compile perl5 on your machine, a number of libraries
are usually needed.  Include any other special libraries here as well.
Say "none" for none.  The default list is almost always right.
 
What libraries to use? [-lpthread -lgdbm -ldbm -ldl -lm -lutil -lc] 

By default, perl5 compiles with the -O flag to use the optimizer.
Alternately, you might want to use the symbolic debugger, which uses
the -g flag (on traditional Unix systems).  Either flag can be
specified here.  To use neither flag, specify the word "none".

What optimizer/debugger flag should be used? [-O3] 

Your C compiler may want other flags.  For this question you should include
-I/whatever and -DWHATEVER flags and any other flags used by the C compiler,
but you should NOT include libraries or ld flags like -lwhatever.  If you
want perl5 to honor its debug switch, you should include -DDEBUGGING here.
Your C compiler might also need additional flags, such as -D_POSIX_SOURCE.

To use no flags, specify the word "none".

Any additional cc flags?
[-fno-common -DPERL_DARWIN -no-cpp-precomp -mmacosx-version-min=10.13 -fno-strict-aliasing -pipe -fstack-protector-strong -I/opt/local/include -I/usr/local/include -DPERL_USE_SAFE_PUTENV] 
 
Let me guess what the preprocessor flags are...
They appear to be: -no-cpp-precomp -fno-common -DPERL_DARWIN -no-cpp-precomp -mmacosx-version-min=10.13 -fno-strict-aliasing -pipe -fstack-protector-strong -I/usr/local/include -I/opt/local/include

Your C linker may need flags.  For this question you should
include -L/whatever and any other flags used by the C linker, but you
should NOT include libraries like -lwhatever.

Make sure you include the appropriate -L/path flags if your C linker
does not normally search all of the directories you specified above,
namely
	/opt/local/lib /opt/local/libexec/llvm-16/lib/clang/16/lib /usr/local/lib /usr/lib
To use no flags, specify the word "none".

Any additional ld flags (NOT including libraries)?
[-mmacosx-version-min=10.13 -fstack-protector-strong -L/opt/local/lib -L/usr/local/lib] 
 
Checking your choice of C compiler and flags for coherency...
OK, that should do.
 
 
Checking to see if you have long long...
You have long long.
 
Computing filename position in cpp output for #include directives...
Your cpp writes the filename in the third field of the line.
 
<inttypes.h> found.
 
Checking to see if you have int64_t...
You have int64_t.
 
Checking which 64-bit integer type we could use...
We could use 'long' for 64-bit integers.

You have natively 64-bit long integers.

You may also choose to try maximal 64-bitness.  It means using as much
64-bitness as possible on the platform.  This in turn means even more
binary incompatibilities.  On the other hand, your platform may not
have any more 64-bitness available than what you already have chosen.

If this doesn't make any sense to you, just accept the default 'y'.
(The default has been chosen based on your configuration.)
Try to use maximal 64-bit support, if available? [y] 
 
Checking if your C library has broken 64-bit functions...
Your C library's 64-bit functions are ok.
 
Checking for GNU C Library...
You are not using the GNU C Library

I can use /opt/local/bin/nm to extract the symbols from your C libraries. This
is a time consuming task which may generate huge output on the disk (up
to 3 megabytes) but that should make the symbols extraction faster. The
alternative is to skip the 'nm' extraction part and to compile a small
test program instead to determine whether each symbol is present. If
you have a fast C compiler and/or if your 'nm' output cannot be parsed,
this may be the best solution.

You probably shouldn't let me use 'nm' if you are using the GNU C Library.

Shall I use /opt/local/bin/nm to extract C symbols from the libraries? [n] 
 
Checking for C++...
You are not using a C++ compiler.
 
 
Checking to see if you have long double...
You have long double.
 
ldexpl() found.
Checking the kind of long doubles you have...
You have x86 80-bit little endian long doubles.
 
Getting the current patchlevel...
(You have perl5 version 34 subversion 3.)
 
What is your architecture name [darwin-2level] darwin-thread-multi-2level
Add the Perl API version to your archname? [n] 
This architecture is naturally 64-bit, not changing architecture name.
 
Pathname where the public executables will reside? (~name ok)
[/opt/local/bin] 

Would you like to build Perl so that the installation is relocatable, so that
library paths in @INC are determined relative to the path of the perl binary?
This is not advised for system Perl installs, or if you need to run setid
scripts or scripts under taint mode.

If this doesn't make any sense to you, just accept the default 'n'.
Use relocatable @INC? [n] 

There are some auxiliary files for perl5 that need to be put into a
private library directory that is accessible by everyone.

Pathname where the private library files will reside? (~name ok)
[/opt/local/lib/perl5/5.34.3] 

Perl5 contains architecture-dependent library files.  If you are
sharing libraries in a heterogeneous environment, you might store
these files in a separate location.  Otherwise, you can just include
them with the rest of the public library files.

Where do you want to put the public architecture-dependent libraries? (~name ok)
[/opt/local/lib/perl5/5.34.3/darwin-2level] /opt/local/lib/perl5/5.34/darwin-thread-multi-2level

Some kernels have a bug that prevents setuid #! scripts from being
secure.  Some sites have disabled setuid #! scripts because of this.

First let's decide if your kernel supports secure setuid #! scripts.
(If setuid #! scripts would be secure but have been disabled anyway,
don't say that they are secure if asked.)

If you are not sure if they are secure, I can check but I'll need a
username and password different from the one you are using right now.
If you don't have such a username or don't want me to test, simply
enter 'none'.

Other username to test security of setuid scripts with? [none] 
Well, the previous value is *not* secure.
Does your kernel have *secure* setuid scripts? [n] 
Looking for a previously installed perl5.005 or later... 
Using /opt/local/bin/perl.

After perl5 is installed, you may wish to install various
add-on modules and utilities.  Typically, these add-ons will
be installed under /opt/local with the rest
of this package.  However, you may wish to install such add-ons
elsewhere under a different prefix.

If you do not wish to put everything under a single prefix, that's
ok.  You will be prompted for the individual locations; this siteprefix
is only used to suggest the defaults.

The default should be fine for most people.

Installation prefix to use for add-on modules and utilities? (~name ok)
[/opt/local] 

The installation process will create a directory for
site-specific extensions and modules.  Most users find it convenient
to place all site-specific files in this directory rather than in the
main distribution directory.

Pathname for the site-specific library files? (~name ok)
[/opt/local/lib/perl5/site_perl/5.34.3] 

In order to ease the process of upgrading, this version of perl
can be configured to use modules built and installed with earlier
versions of perl that were installed under /opt/local.  Specify here
the list of earlier versions that this version of perl should check.
If Configure detected no earlier versions of perl installed under
/opt/local, then the list will be empty.  Answer 'none' to tell perl
to not search earlier versions.

The default should almost always be sensible, so if you're not sure,
just accept the default.
List of earlier versions to include in @INC? [5.34] 
 
<malloc/malloc.h> found.
 
<malloc.h> NOT found.
 
 
Do you wish to wrap malloc calls to protect against potential overflows? [y] 
 
Do you wish to attempt to use the malloc that comes with perl5? [n] 
 
Your system wants malloc to return 'void *', it would seem.
Your system uses void free(), it would seem.

The installation process will also create a directory for
architecture-dependent site-specific extensions and modules.

Pathname for the site-specific architecture-dependent library files? (~name ok)
[/opt/local/lib/perl5/site_perl/5.34.3/darwin-2level] /opt/local/lib/perl5/site_perl/5.34.3/darwin-thread-multi-2level

The installation process will also create a directory for
vendor-supplied add-ons.  Vendors who supply perl with their system
may find it convenient to place all vendor-supplied files in this
directory rather than in the main distribution directory.  This will
ease upgrades between binary-compatible maintenance versions of perl.

Of course you may also use these directories in whatever way you see
fit.  For example, you might use them to access modules shared over a
company-wide network.

The default answer should be fine for most people.
This causes further questions about vendor add-ons to be skipped
and no vendor-specific directories will be configured for perl.

Do you want to configure vendor-specific add-on directories? [n] 

Lastly, you can have perl look in other directories for extensions and
modules in addition to those already specified.
These directories will be searched after
	/opt/local/lib/perl5/site_perl/5.34.3/darwin-thread-multi-2level
	/opt/local/lib/perl5/site_perl/5.34.3
 
Enter a colon-separated set of extra paths to include in perl's @INC
search path, or enter 'none' for no extra paths.

Colon-separated list of additional directories for perl to search? [none] 

Perl can be built to support DTrace on platforms that support it.
DTrace is a diagnosis and performance analysis tool from Sun.

If this doesn't make any sense to you, just accept the default.
Support DTrace if available? [n] 
 
Perl can be built with extra modules or bundles of modules which
will be fetched from the CPAN and installed alongside Perl.

Notice that you will need access to the CPAN; either via the Internet,
or a local copy, for example a CD-ROM or a local CPAN mirror.  (You will
be asked later to configure the CPAN.pm module which will in turn do
the installation of the rest of the extra modules or bundles.)

Notice also that if the modules require any external software such as
libraries and headers (the libz library and the zlib.h header for the
Compress::Zlib module, for example) you MUST have any such software
already installed, this configuration process will NOT install such
things for you.

If this doesn't make any sense to you, just accept the default 'n'.
Install any extra modules (y or n)? [n] 
 

If you wish to install html files for programs in Perl5, indicate
the appropriate directory here.  To skip installing html files,
answer "none".
Directory for the main Perl5 html pages? (~name ok) [none] 

If you wish to install html files for modules associated with Perl5,
indicate the appropriate directory here.  To skip installing html files,
answer "none".
Directory for the Perl5 module html pages? (~name ok) [ ] 
(That expands to  on this system.)
 
Many scripts expect perl to be installed as /usr/bin/perl.

If you want to, I can install the perl you are about to compile
as /usr/bin/perl (in addition to /opt/local/bin/perl).

However, please note that because you already have a /usr/bin/perl,
overwriting that with a new Perl would very probably cause problems.
Therefore I'm assuming you don't want to do that (unless you insist).

Do you want to install perl as /usr/bin/perl? [n] 
 
dlopen() found.
 
<unistd.h> found.
 
Do you wish to use dynamic loading? [y] 
The following dynamic loading files are available:
ext/DynaLoader/dl_aix.xs	ext/DynaLoader/dl_hpux.xs
ext/DynaLoader/dl_dllload.xs	ext/DynaLoader/dl_none.xs
ext/DynaLoader/dl_dlopen.xs	ext/DynaLoader/dl_vms.xs
ext/DynaLoader/dl_dyld.xs	ext/DynaLoader/dl_win32.xs
ext/DynaLoader/dl_freemint.xs
Source file to use for dynamic loading [ext/DynaLoader/dl_dlopen.xs] 

Some systems may require passing special flags to /opt/local/bin/clang -c to
compile modules that will be used to create a shared library.
To use no flags, say "none".

Any special flags to pass to /opt/local/bin/clang -c to compile shared library modules?
[none] 

Some systems use ld to create libraries that can be dynamically loaded,
while other systems (such as those using ELF) use /opt/local/bin/clang.

What command should be used to create dynamic libraries?
[/opt/local/bin/clang] 

Some systems may require passing special flags to /opt/local/bin/clang to create a
library that can be dynamically loaded.  If your ld flags include
-L/other/path options to locate libraries outside your loader's normal
search path, you may need to specify those -L options here as well.  To
use no flags, say "none".

Any special flags to pass to /opt/local/bin/clang to create a dynamically loaded library?
[-mmacosx-version-min=10.13 -bundle -undefined dynamic_lookup -L/opt/local/lib -L/usr/local/lib -fstack-protector-strong] 

Some systems may require passing special flags to /opt/local/bin/clang to indicate that
the resulting executable will use dynamic linking.  To use no flags,
say "none".

Any special flags to pass to /opt/local/bin/clang to use dynamic linking?
[none] 

The perl executable is normally obtained by linking perlmain.c with
libperl.a, any static extensions (usually just DynaLoader), and
any other libraries needed on this system (such as -lm, etc.).  Since
your system supports dynamic loading, it is probably possible to build
a shared libperl.dylib.  If you will have more than one executable linked
to libperl.dylib, this will significantly reduce the size of each
executable, but it may have a noticeable effect on performance.  The
default is probably sensible for your system.


Build a shared libperl.dylib (y/n) [n] 
 
System manual is in /usr/share/man/man1.

Perl5 has manual pages available in source form.
If you don't want the manual sources installed, answer 'none'.
 
Where do the main Perl5 manual pages (source) go? (~name ok)
[/opt/local/share/man/man1] 
What suffix should be used for the main Perl5 man pages? [1] 
 
You can have filenames longer than 14 characters.

Perl5 has manual pages for many of the library modules.
If you don't want the manual sources installed, answer 'none'.
 
Where do the perl5 library man pages (source) go? (~name ok)
[/opt/local/share/man/man3] 
What suffix should be used for the perl5 library man pages? [3] 
 
Figuring out host name...
Your host name appears to be "macmini". Right? [y] 
 
What is your domain name? [.k-in.co.jp] 

I need to get your e-mail address in Internet format if possible, i.e.
something like user@host.domain. Please answer accurately since I have
no easy means to double check it. The default value provided below
is most probably close to reality but may not be valid from outside
your organization...

What is your e-mail address? [admin@k-in.co.jp] 

If you or somebody else will be maintaining perl at your site, please
fill in the correct e-mail address here so that they may be contacted
if necessary. Currently, the "perlbug" program included with perl
will send mail to this address in addition to perlbug@perl.org. You may
enter "none" for no administrator.

Perl administrator e-mail address [admin@k-in.co.jp] 
 
Do you want to use a version number suffix for installed binaries? This
will install 'perl5.34.3' instead of 'perl', and likewise for other
binaries like 'perldoc' and 'cpan'. This allows many versions of perl
to be installed side-by-side. Unless you are a developer, you probably
do *not* want to do this.
Do you want to use a version number suffix for installed binaries? [n] 
I'll use #!/opt/local/bin/perl to start perl scripts.

Some installations have a separate directory just for executable scripts so
that they can mount it across multiple architectures but keep the scripts in
one spot.  You might, for example, have a subdirectory of /usr/share for this.
Or you might just lump your scripts in with all your other executables.

Where do you keep publicly executable scripts? (~name ok) [/opt/local/bin] 
Pathname where the add-on public executables should be installed? (~name ok)
[/opt/local/bin] 
Pathname where the site-specific html pages should be installed? (~name ok)
[none] 
Pathname where the site-specific library html pages should be installed? (~name ok)
[none] 
Pathname where the site-specific manual pages should be installed? (~name ok)
[/opt/local/share/man/man1] 
Pathname where the site-specific library manual pages should be installed? (~name ok)
[/opt/local/share/man/man3] 
Pathname where add-on public executable scripts should be installed? (~name ok)
[/opt/local/bin] 
 
backtrace() found.

Perl can be built to use 'fast stdio', which means using the stdio
library but also directly manipulating the stdio buffers to enable
faster I/O.  Using stdio is better for backward compatibility (especially
for Perl extensions), but on the other hand since Perl 5.8 the 'perlio'
interface has been preferred instead of stdio.

If this doesn't make any sense to you, just accept the default 'n'.
Use the "fast stdio" if available? [n] 
 
Checking to see how big your file offsets are...
Your file offsets are 8 bytes long.
 
Checking the size of fpos_t...
Your fpos_t is 8 bytes long.

You can have files larger than 2 gigabytes.
 
qgcvt() NOT found.
Checking the kind of doubles you have...
You have IEEE 754 64-bit little endian doubles.
 
Checking how to print long doubles...
 
fwalk() NOT found.
 
accept4() NOT found.
 
access() found.
 
<sys/file.h> defines the *_OK access constants.
 
accessx() NOT found.
 
acosh() found.
 
aintl() NOT found.
 
alarm() found.
 
ctime64() NOT found.
 
localtime64() NOT found.
 
gmtime64() NOT found.
 
mktime64() NOT found.
 
difftime64() NOT found.
 
asctime64() NOT found.
 
<pthread.h> found.
 
<sys/types.h> found.
 
<sys/select.h> found.
 
 
Checking to see if your struct tm has tm_zone field...
Yes, it does.
 
Checking to see if your struct tm has tm_gmtoff field...
Yes, it does.
 
asctime_r() found.
 
*** WHOA THERE!!! ***
    The previous value for $d_asctime_r on this machine was "undef"!
    Keep the previous value? [y] 
 
asinh() found.
 
atanh() found.
 
atolf() NOT found.
 
atoll() found.
 
getpgrp() found.
 
Checking to see which flavor of getpgrp is in use...
(I see you are running Configure as super-user...)
You have to use getpgrp() instead of getpgrp(pid).
 
setpgrp() found.
 
Checking to see which flavor of setpgrp is in use...
(I see you are running Configure as super-user...)
You have to use setpgrp() instead of setpgrp(pid,pgrp).
Checking for C99 variadic macros.
You have C99 variadic macros.
 
You have void (*signal())().
 
Checking whether your C compiler can cast large floats to int32.
Nope, it can't.
 
Checking whether your C compiler can cast negative float to unsigned.
Yup, it can.
 
cbrt() found.
 
chown() found.
 
chroot() found.
 
chsize() NOT found.
 
class() NOT found.
 
clearenv() NOT found.
 
Hmm... Looks like you have Berkeley networking support.
 
socketpair() found.
Checking the availability sa_len in the sock struct ...
Checking the availability struct sockaddr_in6 ...
Checking the availability struct sockaddr_storage ...
Checking the availability sin6_scope_id in struct sockaddr_in6 ...
Checking the availability struct ip_mreq ...
Checking the availability struct ip_mreq_source ...
Checking the availability struct ipv6_mreq ...
Checking the availability struct ipv6_mreq_source ...
Checking the availability of certain socket constants...
 
<sys/uio.h> found.
 
Checking to see if your system supports struct cmsghdr...
Yes, it does.
 
copysign() found.
 
copysignl() found.
 
 
crypt() found.
 
<crypt.h> NOT found.
 
crypt_r() NOT found.
 
ctermid() found.
 
ctermid_r() found.
 
*** WHOA THERE!!! ***
    The previous value for $d_ctermid_r on this machine was "undef"!
    Keep the previous value? [y] 
 
ctime_r() found.
 
*** WHOA THERE!!! ***
    The previous value for $d_ctime_r on this machine was "undef"!
    Keep the previous value? [y] 
 
cuserid() NOT found.
 
dbmclose() NOT found.
We won't be including <dbm.h>
 
dbminit() prototype NOT found.
 
difftime() found.
 
<dirent.h> found.
 
Your directory entries are struct dirent.
 
Good, your directory entry keeps length information in d_namlen.
Checking to see if DIR has a dd_fd member variable
No, it does not.
 
<sys/dir.h> found.
 
<sys/ndir.h> NOT found.
 
dirfd() found.
 
dladdr() found.
 
dlerror() found.
 
<dlfcn.h> found.

On a few systems, the dynamically loaded modules that perl generates and uses
will need a different extension than shared libs. The default will probably
be appropriate.

What is the extension of dynamically loaded modules [bundle] 
 
Checking whether your dlsym() needs a leading underscore ...
I can't compile and run the test program.
I'm guessing that dlsym doesn't need a leading underscore.
 
drand48_r() NOT found.
 
drand48() prototype found.
 
dup2() found.
 
dup3() NOT found.
 
<xlocale.h> found.
 
newlocale() found.
 
freelocale() found.
 
uselocale() found.
 
duplocale() found.
 
querylocale() found.
 
eaccess() NOT found.
 
endgrent() found.
 
<grp.h> found.
 
endgrent_r() NOT found.
 
endhostent() found.
 
<netdb.h> found.
 
endhostent_r() NOT found.
 
endnetent() found.
 
endnetent_r() NOT found.
 
endprotoent() found.
 
endprotoent_r() NOT found.
 
endpwent() found.
 
<pwd.h> found.
 
endpwent_r() NOT found.
 
endservent() found.
 
endservent_r() NOT found.
 
<sys/file.h> defines the O_* constants...
and you have the 3 argument form of open().
 
<sys/file.h> found.
 
We'll be including <sys/file.h>.
 
<fcntl.h> found.
 
We don't need to include <fcntl.h> if we include <sys/file.h>.
 
fork() found.
 
pipe() found.
 
Figuring out the flag used by open() for non-blocking I/O...
Using previous value O_NONBLOCK.
 
Let's see what value errno gets from read() on a O_NONBLOCK file...
Using previous value EAGAIN.
Your read() returns -1 when no data is present.
And you can see EOF because read() returns 0.
 
erf() found.
 
erfc() found.
 
exp2() found.
 
expm1() found.
 
(Looks like you have stdio.h from BSD.)
Checking how std your stdio is...
Your stdio doesn't appear very std.
 
fchdir() found.
 
fchmod() found.
 
openat() found.
 
unlinkat() found.
 
renameat() found.
 
linkat() found.
 
fchmodat() found.
 
fchown() found.
 
fcntl() found.
 
Checking if fcntl-based file locking works... 
Yes, it seems to work.

Checking to see how well your C compiler handles fd_set and friends ...
Well, your system knows about the normal fd_set typedef...
and you have the normal fd_set macros (just as I'd expect).
 
fdclose() NOT found.
 
fdim() found.
 
fegetround() found.
 
fgetpos() found.
 
finite() found.
 
*** WHOA THERE!!! ***
    The previous value for $d_finite on this machine was "undef"!
    Keep the previous value? [y]  
 
finitel() NOT found.
 
flock() found.
 
flock() prototype found.
 
fma() found.
 
fmax() found.
 
fmin() found.
 
fp_class() NOT found.
Checking to see if you have fpclassify...
You have fpclassify.
 
fp_classify() NOT found.
 
fp_classl() NOT found.
 
pathconf() found.
 
fpathconf() found.
 
fpclass() NOT found.
 
fpclassl() NOT found.
 
fpgetround() NOT found.
 
Checking to see if you have fpos64_t...
You do not have fpos64_t.
(Your fpos_t is 64 bits, so you could use that.)
 
frexpl() found.
 
<sys/param.h> found.
 
<sys/mount.h> found.
 
Checking to see if your system supports struct fs_data...
No, it doesn't.
 
fseeko() found.
(Your long is 64 bits, so you could use fseek.)
 
fsetpos() found.
 
fstatfs() found.
 
statvfs() found.
 
fstatvfs() found.
 
fsync() found.
 
ftello() found.
(Your long is 64 bits, so you could use ftell.)
 
Checking if you have a working futimes()
Yes, you have
 
A working gai_strerror() found.
 
<ndbm.h> found.
 
<gdbm/ndbm.h> NOT found.
 
<gdbm-ndbm.h> NOT found.
 
dbm_open() found.
Checking if your <ndbm.h> uses prototypes...
Your <ndbm.h> seems to have prototypes
 
getaddrinfo() found.
 
getcwd() found.
 
getespwnam() NOT found.
 
getfsstat() found.
 
getgrent() found.
 
getgrent_r() NOT found.
 
getgrgid_r() found.
 
*** WHOA THERE!!! ***
    The previous value for $d_getgrgid_r on this machine was "undef"!
    Keep the previous value? [y] 
 
getgrnam_r() found.
 
*** WHOA THERE!!! ***
    The previous value for $d_getgrnam_r on this machine was "undef"!
    Keep the previous value? [y] 
 
gethostbyaddr() found.
 
gethostbyname() found.
 
gethostent() found.
 
gethostname() found.
uname() found.

Every now and then someone has a gethostname() that lies about the hostname
but can't be fixed for political or economic reasons.  If you wish, I can
pretend gethostname() isn't there and maybe compute hostname at run-time
thanks to the 'hostname' command.

Shall I ignore gethostname() from now on? [n] 
 
gethostbyaddr_r() NOT found.
 
gethostbyname_r() NOT found.
 
gethostent_r() NOT found.
 
gethostent() prototype found.
 
getitimer() found.
 
getlogin() found.
 
getlogin_r() found.
 
*** WHOA THERE!!! ***
    The previous value for $d_getlogin_r on this machine was "undef"!
    Keep the previous value? [y] 
 
getmnt() NOT found.
 
getmntent() NOT found.
 
getnameinfo() found.
 
getnetbyaddr() found.
 
getnetbyname() found.
 
getnetent() found.
 
getnetbyaddr_r() NOT found.
 
getnetbyname_r() NOT found.
 
getnetent_r() NOT found.
 
getnetent() prototype found.
 
getpagesize() found.
 
getprotobyname() found.
 
getprotobynumber() found.
 
getprotoent() found.
 
getpgid() found.
 
getpgrp2() NOT found.
 
getppid() found.
 
getpriority() found.
 
getprotobyname_r() NOT found.
 
getprotobynumber_r() NOT found.
 
getprotoent_r() NOT found.
 
getprotoent() prototype found.
 
getprpwnam() NOT found.
 
getpwent() found.
 
getpwent_r() NOT found.
 
getpwnam_r() found.
 
*** WHOA THERE!!! ***
    The previous value for $d_getpwnam_r on this machine was "undef"!
    Keep the previous value? [y] 
 
getpwuid_r() found.
 
*** WHOA THERE!!! ***
    The previous value for $d_getpwuid_r on this machine was "undef"!
    Keep the previous value? [y] 
 
getservbyname() found.
 
getservbyport() found.
 
getservent() found.
 
getservbyname_r() NOT found.
 
getservbyport_r() NOT found.
 
getservent_r() NOT found.
 
getservent() prototype found.
 
getspnam() NOT found.
 
<shadow.h> NOT found.
 
getspnam_r() NOT found.
 
gettimeofday() found.
 
gmtime_r() found.
 
*** WHOA THERE!!! ***
    The previous value for $d_gmtime_r on this machine was "undef"!
    Keep the previous value? [y] 
 
hasmntopt() NOT found.
 
<netinet/in.h> found.
 
<arpa/inet.h> found.
 
htonl() found.
 
hypot() found.
 
ilogb() found.
 
ilogbl() found.
 
inet_aton() found.
 
inet_ntop() found.
 
inet_pton() found.
 
isascii() found.
 
isblank() found.
Checking to see if you have isfinite...
You have isfinite.
 
isfinitel() NOT found.
Checking to see if you have isinf...
You have isinf.
 
isinfl() NOT found.
Checking to see if you have isless...
You have isless.
Checking to see if you have isnan...
You have isnan.
 
isnanl() NOT found.
Checking to see if you have isnormal...
You have isnormal.
 
j0() found.
 
j0l() NOT found.
 
killpg() found.
 
localeconv() found.
 
lchown() found.
 
LDBL_DIG found.
 
lgamma() found.
 
lgamma_r() found.
 
Checking to see if your libm supports _LIB_VERSION...
No, it does not (probably harmless)
 
link() found.
 
llrint() found.
 
llrintl() found.
 
llround() found.
 
llroundl() found.
 
localeconv_l() found.
 
localtime_r() found.
 
*** WHOA THERE!!! ***
    The previous value for $d_localtime_r on this machine was "undef"!
    Keep the previous value? [y] 
 
lockf() found.
 
log1p() found.
 
log2() found.
 
logb() found.
 
lrint() found.
 
lrintl() found.
 
lround() found.
 
lroundl() found.
 
lseek() prototype found.
 
lstat() found.
 
madvise() found.
 
malloc_size() found.
 
malloc_good_size() found.
 
malloc_usable_size() NOT found.
 
mblen() found.
 
mbrlen() found.
 
mbrtowc() found.
 
mbstowcs() found.
 
mbtowc() found.
 
memmem() prototype found.
 
memmem() found.
 
memrchr() prototype NOT found.
 
mkdir() found.
 
mkdtemp() found.
 
mkfifo() found.
 
mkostemp() found.
 
*** WHOA THERE!!! ***
    The previous value for $d_mkostemp on this machine was "undef"!
    Keep the previous value? [y] 
 
mkstemp() found.
 
mkstemps() found.
 
mktime() found.
 
<sys/mman.h> found.
 
mmap() found.
and it returns (void *).
 
sqrtl() found.
 
scalbnl() found.
 
truncl() found.
 
modfl() found.
 
modfl() prototype found.
 
mprotect() found.
 
msgctl() found.
 
msgget() found.
 
msgsnd() found.
 
msgrcv() found.
 
You have the full msg*(2) library.
 
Checking to see if your system supports struct msghdr...
Yes, it does.
 
msync() found.
 
munmap() found.
 
nan() found.
 
nanosleep() found.
 
nearbyint() found.
 
nextafter() found.
 
nexttoward() found.
 
nice() found.
 
<langinfo.h> found.
 
nl_langinfo() found.
 
<quadmath.h> NOT found.
 
Choosing the C types to be used for Perl's internal types...
(IV will be long, 8 bytes)
(UV will be unsigned long, 8 bytes)
(NV will be double, 8 bytes)
Checking how many bits of your UVs your NVs can preserve...
Your NVs can preserve only 53 bits of your UVs.
Checking to find the largest integer value your NVs can hold...
The largest integer your NVs can preserve is equal to 256.0*256.0*256.0*256.0*256.0*256.0*2.0*2.0*2.0*2.0*2.0
Checking whether NV 0.0 is all bits zero in memory...
0.0 is represented as all bits zero in memory
 
Checking to see if you have off64_t...
You do not have off64_t.
(Your off_t is 64 bits, so you could use that.)
 
pause() found.
 
pipe2() NOT found.
 
poll() found.
 
*** WHOA THERE!!! ***
    The previous value for $d_poll on this machine was "undef"!
    Keep the previous value? [y] 
 
prctl() NOT found.
 
readlink() found.
 
 
vfork() found.
 

Perl can only use a vfork() that doesn't suffer from strict
restrictions on calling functions or modifying global data in
the child.  For example, glibc-2.1 contains such a vfork()
that is unsuitable.  If your system provides a proper fork()
call, chances are that you do NOT want perl to use vfork().

Do you still want to use vfork()? [y] 
 
pthread_attr_setscope() found.
 
Checking to see if you have ptrdiff_t...
You have ptrdiff_t.
 
random_r() NOT found.
 
readdir() found.
 
seekdir() found.
 
telldir() found.
 
rewinddir() found.
 
readdir64_r() NOT found.
 
readdir_r() found.
 
*** WHOA THERE!!! ***
    The previous value for $d_readdir_r on this machine was "undef"!
    Keep the previous value? [y] 
 
readv() found.
 
recvmsg() found.
 
regcomp() found.
 
remainder() found.
 
remquo() found.
 
rename() found.
 
rint() found.
 
rmdir() found.
 
round() found.
 
sbrk() prototype found.
 
scalbn() found.
 
select() found.
 
semctl() found.
 
semget() found.
 
semop() found.
 
You have the full sem*(2) library.
 
You have union semun in <sys/sem.h>.
 
You can use union semun for semctl IPC_STAT.
You can also use struct semid_ds* for semctl IPC_STAT.
 
sendmsg() found.
 
setegid() found.
 
seteuid() found.
 
setgrent() found.
 
setgrent_r() NOT found.
 
sethostent() found.
 
sethostent_r() NOT found.
 
setitimer() found.
 
setlinebuf() found.
 
<locale.h> found.
 
<wctype.h> found.
 
towupper() found.
Does your system have the C.UTF8 locale? [n] 
When you set your locale to something besides C, does it do so, or just pretend to?
[n] 
 
setlocale_r() NOT found.
 
setnetent() found.
 
setnetent_r() NOT found.
 
setprotoent() found.
 
setpgid() found.
 
setpgrp2() NOT found.
 
setpriority() found.
 
setproctitle() NOT found.
 
setprotoent_r() NOT found.
 
setpwent() found.
 
setpwent_r() NOT found.
 
setregid() found.
 
setresgid() NOT found.
 
setreuid() found.
 
setresuid() NOT found.
 
setrgid() found.
 
setruid() found.
 
setservent() found.
 
setservent_r() NOT found.
 
setsid() found.
 
setvbuf() found.
 
shmctl() found.
 
shmget() found.
 
shmat() found.
and it returns (void *).
 
shmdt() found.
 
You have the full shm*(2) library.
 
sigaction() found.
 
Looking for the type for user ids returned by getuid().
uid_t found.
Checking if your siginfo_t has si_errno field...
Checking if your siginfo_t has si_pid field...
Checking if your siginfo_t has si_uid field...
Checking if your siginfo_t has si_addr field...
Checking if your siginfo_t has si_status field...
Checking if your siginfo_t has si_band field...
Checking if your siginfo_t has si_value field...
Checking if your siginfo_t has si_fd field...
 
<sunmath.h> NOT found.
Checking to see if you have signbit() available to work on double... Yes.
 
sigprocmask() found.
 
POSIX sigsetjmp found.
 
snprintf() found.
 
vsnprintf() found.
Checking whether your snprintf() and vsnprintf() work okay...
Your snprintf() and vsnprintf() seem to be working okay.
 
sockatmark() found.
 
sockatmark() prototype found.
 
socks5_init() NOT found.
 
srand48_r() NOT found.
 
srandom_r() NOT found.
 
setresgid() prototype NOT found.
 
setresuid() prototype NOT found.
 
stat() found.
 
<sys/stat.h> found.
 
Checking to see if your struct stat has st_blocks field...
 
<sys/vfs.h> NOT found.
 
<sys/statfs.h> NOT found.
 
Checking to see if your system supports struct statfs...
Yes, it does.
 
Checking to see if your struct statfs has f_flags field...
Yes, it does.
 
Checking to see if your system supports static inline...
Keeping your previous value of static __inline__.
Checking how to access stdio streams by file descriptor number...
I can't figure out how to access stdio streams by file descriptor number.
 
strcoll() found.
 
strerror_l() NOT found.
 
strerror_r() found.
 
*** WHOA THERE!!! ***
    The previous value for $d_strerror_r on this machine was "undef"!
    Keep the previous value? [y] 
 
strftime() found.
 
strlcat() prototype found.
 
strlcat() found.
 
strlcpy() prototype found.
 
strlcpy() found.
 
strnlen() found.
 
strtod() found.
 
strtod_l() found.
 
strtol() found.
 
strtold() found.
 
strtold_l() found.
 
strtoll() found.
Checking whether your strtoll() works okay...
Your strtoll() seems to be working okay.
 
strtoq() found.
 
strtoul() found.
Checking whether your strtoul() works okay...
Your strtoul() seems to be working okay.
 
strtoull() found.
Checking whether your strtoull() works okay...
Your strtoull() seems to be working okay.
 
strtouq() found.
Checking whether your strtouq() works okay...
Your strtouq() seems to be working okay.
 
strxfrm() found.
 
symlink() found.
 
syscall() found.
 
*** WHOA THERE!!! ***
    The previous value for $d_syscall on this machine was "undef"!
    Keep the previous value? [y] 
 
syscall() prototype found.
 
sysconf() found.
 
 
system() found.
 
tcgetpgrp() found.
 
tcsetpgrp() found.
 
telldir() prototype found.
 
tgamma() found.

Checking to see if you have nl_langinfo_l() and that it is thread-safe
Since threads aren't selected, we won't bother looking for nl_langinfo_l()
 
 
timegm() found.
 
<sys/times.h> found.
 
times() found.
 
tmpnam_r() NOT found.
 
towlower() found.
 
trunc() found.
 
truncate() found.
 
ttyname_r() found.
 
*** WHOA THERE!!! ***
    The previous value for $d_ttyname_r on this machine was "undef"!
    Keep the previous value? [y] 
 
tzname[] found.
 
You seem to be doing a multiarchitecture build,
skipping the byteorder check.


Checking to see whether you can access character data unalignedly...
 
ualarm() found.
 
umask() found.
 
unordered() NOT found.
 
unsetenv() found.
 
usleep() found.
 
usleep() prototype found.
 
ustat() NOT found.
 
closedir() found.
 
Checking whether closedir() returns a status...
Yes, it does.
 
wait4() found.
 
waitpid() found.
 
wcrtomb() found.
 
A working wcscmp() found.
 
wcstombs() found.
 
A working wcsxfrm() found.
 
wctomb() found.
 
writev() found.
 
Doubles must be aligned on a how-many-byte boundary? [8] 
What is the length of a character (in bits)? [8] 
 
Checking to see how your cpp does stuff like concatenate tokens...
Oh!  Smells like ANSI's been here.
We can catify or stringify, separately or together!
 
<db.h> found.
 
Checking Berkeley DB version ...
You have Berkeley DB Version 1.
Looks OK.
 
Checking return type needed for hash for Berkeley DB ...
Your version of Berkeley DB uses u_int32_t for hash.
 
Checking return type needed for prefix for Berkeley DB ...
Your version of Berkeley DB uses size_t for prefix.

Historically Perl has provided a final fallback of the current working
directory '.' when searching for a library. This, however, can lead to
problems when a Perl program which loads optional modules is called from
a shared directory. This can lead to executing unexpected code.

Exclude . from @INC by default?  [y] 
Checking the kind of infinities and nans you have...
(The following tests may crash.  That's okay.)
Checking how many mantissa bits your doubles have...
Checking how many mantissa bits your long doubles have...
Checking how many mantissa bits your NVs have...
 
Using our internal random number implementation...
 
Determining whether or not we are on an EBCDIC system...
Nope, no EBCDIC, probably ASCII or some ISO Latin. Or UTF-8.
 
Checking how to flush all pending stdio output...
 
Looking for the type for group ids returned by getgid().
gid_t found.
 
Checking the size of gid_t...
Your gid_t is 4 bytes long.
 
Checking the sign of gid_t...
Your gid_t is unsigned.
 
Checking how to print 64-bit integers...
 
Checking the format strings to be used for Perl's internal types...
 
Checking the format string to be used for gids...
 
getgroups() found.
 
setgroups() found.
 
What type of pointer is the second argument to getgroups() and setgroups()?
Usually this is the same as group ids, gid_t, but not always.

What type pointer is the second argument to getgroups() and setgroups()?
[gid_t] 
 
Checking if your /usr/bin/make program sets $(MAKE)...
Yup, it does.
 
It seems that va_copy() or similar will be needed.
 
What pager is used on your system? [/usr/bin/less -R] 
 
Checking how to generate random libraries on your machine...
your system has 'ranlib'; we'll use that.
Checking max offsets that gmtime () accepts
Checking max offsets that localtime () accepts
 
Checking the size of size_t...
Your size_t size is 8 bytes.
 
Checking to see if you have socklen_t...
You have socklen_t.
 
<socks.h> NOT found.

Checking to see what type is the last argument of accept().
 
I'll be using ssize_t for functions returning a byte count.
 
Checking the size of st_ino...
Your st_ino is 8 bytes long.
 
Checking the sign of st_ino...
Your st_ino is unsigned.
 
Your stdio uses signed chars.
 
Checking the size of uid_t...
Your uid_t is 4 bytes long.
 
Checking the sign of uid_t...
Your uid_t is unsigned.
 
Checking the format string to be used for uids...

EXPERIMENTAL: Perl can now be built with strict on by default when not
invoked with -e or -E. This is a diagnostic tool for development.

Unless you are familiar with this feature, you should probably answer 'no'.

Would you like to build perl with strict enabled by default? [n] 
 
Determining whether we can use sysctl with KERN_PROC_PATHNAME to find executing program...
I'm unable to compile the test program.
I'll assume no sysctl with KERN_PROC_PATHNAME here.
 
Determining whether we can use _NSGetExecutablePath to find executing program...
You can use _NSGetExecutablePath to find the executing program.
 
Which compiler compiler (yacc or bison -y) shall I use? [yacc] 
 
<bfd.h> NOT found.
 
<execinfo.h> found.
 
<fenv.h> found.
 
<fp.h> NOT found.
 
<fp_class.h> NOT found.
 
<gdbm.h> found.
 
gdbm_open() found.
 
<libutil.h> NOT found.
 
<mntent.h> NOT found.
 
<net/errno.h> NOT found.
 
<netinet/tcp.h> found.
 
<poll.h> found.
 
*** WHOA THERE!!! ***
    The previous value for $i_poll on this machine was "undef"!
    Keep the previous value? [y] 
 
<prot.h> NOT found.
 
Guessing which symbols your C compiler and preprocessor define...
Your C pre-processor defines the following symbols:
_FORTIFY_SOURCE
_LP64
__BYTE_ORDER__
__GNUC_MINOR__
__GNUC__
__LITTLE_ENDIAN__
__LP64__
__MACH__
__PIC__
__STDC__
__amd64
__amd64__
__clang__
__pic__
__x86_64
__x86_64__
 
Your C compiler further defines the following cpp symbols:
__GCC_HAVE_DWARF2_CFI_ASM
You seem not to have gcc 4.* or later, not adding -D_FORTIFY_SOURCE.
 
tcsetattr() found.
 
You have POSIX termios.h... good!
 
<stdbool.h> found.
 
<stdint.h> found.
 
<sys/access.h> NOT found.
 
<sys/filio.h> found.
 
<sys/ioctl.h> found.
 
You have socket ioctls defined in <sys/sockio.h>.
 
<syslog.h> found.
 
<sys/mode.h> NOT found.
 
<sys/poll.h> found.
 
<sys/resource.h> found.
 
<sys/security.h> NOT found.
 
<sys/statvfs.h> found.
 
<sys/un.h> found.
 
<sys/utsname.h> found.
 
<sys/wait.h> found.
 
<ustat.h> NOT found.
 
<utime.h> found.
 
<vfork.h> NOT found.
 
<wchar.h> found.
 
Looking for extensions...
A number of extensions are supplied with perl5.  You may choose to
compile these extensions for dynamic loading (the default), compile
them into the perl5 executable (static loading), or not include
them at all.  Answer "none" to include no extensions.
Note that DynaLoader is always built and need not be mentioned here.

What extensions do you wish to load dynamically?
[B Compress/Raw/Bzip2 Compress/Raw/Zlib Cwd DB_File Data/Dumper Devel/PPPort Devel/Peek Digest/MD5 Digest/SHA Encode Fcntl File/DosGlob File/Glob Filter/Util/Call GDBM_File Hash/Util Hash/Util/FieldHash I18N/Langinfo IO IPC/SysV List/Util MIME/Base64 Math/BigInt/FastCalc NDBM_File Opcode POSIX PerlIO/encoding PerlIO/mmap PerlIO/scalar PerlIO/via SDBM_File Socket Storable Sys/Hostname Sys/Syslog Time/HiRes Time/Piece Unicode/Collate Unicode/Normalize XS/APItest XS/Typemap attributes mro re threads threads/shared] 
What extensions do you wish to load statically? [ ] 
 
 
End of configuration questions.
 
 
I see a config.over file.  Do you wish to load it? [y] 
Configuration override changes have been loaded.
 
Stripping down executable paths...
 
Creating config.sh...
Hmm...You had some extra variables I don't know about...I'll try to keep 'em...
    Propagating previous variable $LANG...
    Propagating previous variable $LC_ALL...
    Propagating previous variable $config_arg1...
    Propagating previous variable $config_arg2...
    Propagating previous variable $config_arg3...
    Propagating previous variable $malloc_cflags...
    Propagating previous variable $perl_revision...
    Propagating previous variable $perl_subversion...
    Propagating previous variable $perl_version...

If you'd like to make any changes to the config.sh file before I begin
to configure things, do it as a shell escape now (e.g. !vi config.sh).

Press return or use a shell escape to edit config.sh: 
 
Doing variable substitutions on .SH files...
cflags.SH: Adding -std=c89.
cflags.SH: Adding -Werror=pointer-arith.
cflags.SH: Adding -Wextra.
cflags.SH: Adding -Wc++-compat.
cflags.SH: Adding -Wwrite-strings.
cflags.SH: Adding -Werror=declaration-after-statement.
cflags.SH: cc       = /opt/local/bin/clang
cflags.SH: ccflags  = -fno-common -DPERL_DARWIN -no-cpp-precomp -mmacosx-version-min=10.13 -fno-strict-aliasing -pipe -fstack-protector-strong -I/opt/local/include -I/usr/local/include -DPERL_USE_SAFE_PUTENV
cflags.SH: stdflags =  -std=c89
cflags.SH: optimize = -O3
cflags.SH: warn     =  -Wall -Werror=pointer-arith -Wextra -Wc++-compat -Wwrite-strings -Werror=declaration-after-statement
Extracting cflags (with variable substitutions)
Extracting config.h (with variable substitutions)
Extracting makedepend (with variable substitutions)
Extracting Makefile (with variable substitutions)
Extracting myconfig (with variable substitutions)
Extracting pod/Makefile (with variable substitutions)
Extracting Policy.sh (with variable substitutions)
Extracting runtests (with variable substitutions)

Now you need to generate make dependencies by running "make depend".
You might prefer to run it in background: "make depend > makedepend.out &"
It can take a while, so you might not want to run it right now.

Run make depend now? [y] 
sh ./makedepend MAKE="/Applications/Xcode.app/Contents/Developer/usr/bin/make" cflags
echo av.c scope.c op.c doop.c doio.c dump.c gv.c hv.c mg.c reentr.c mro_core.c perl.c perly.c pp.c pp_hot.c pp_ctl.c pp_sys.c regcomp.c regexec.c utf8.c sv.c taint.c toke.c util.c deb.c run.c universal.c pad.c globals.c keywords.c perlio.c numeric.c mathoms.c locale.c pp_pack.c pp_sort.c caretx.c dquote.c time64.c  miniperlmain.c opmini.c perlmini.c | tr ' ' '\n' >.clist
Finding dependencies for av.o
Finding dependencies for scope.o
Finding dependencies for op.o
Finding dependencies for doop.o
Finding dependencies for doio.o
Finding dependencies for dump.o
Finding dependencies for gv.o
Finding dependencies for hv.o
Finding dependencies for mg.o
Finding dependencies for reentr.o
Finding dependencies for mro_core.o
Finding dependencies for perl.o
Finding dependencies for perly.o
Finding dependencies for pp.o
Finding dependencies for pp_hot.o
Finding dependencies for pp_ctl.o
Finding dependencies for pp_sys.o
Finding dependencies for regcomp.o
Finding dependencies for regexec.o
Finding dependencies for utf8.o
Finding dependencies for sv.o
Finding dependencies for taint.o
Finding dependencies for toke.o
Finding dependencies for util.o
Finding dependencies for deb.o
Finding dependencies for run.o
Finding dependencies for universal.o
Finding dependencies for pad.o
Finding dependencies for globals.o
Finding dependencies for keywords.o
Finding dependencies for perlio.o
Finding dependencies for numeric.o
Finding dependencies for mathoms.o
Finding dependencies for locale.o
Finding dependencies for pp_pack.o
Finding dependencies for pp_sort.o
Finding dependencies for caretx.o
Finding dependencies for dquote.o
Finding dependencies for time64.o
Finding dependencies for miniperlmain.o
Finding dependencies for opmini.o
Finding dependencies for perlmini.o
Updating GNUmakefile...
Now you must run 'make'.

If you compile perl5 on a different machine or from a different object
directory, copy the Policy.sh file from this object directory to the
new one before you run Configure -- this will help you with most of
the policy defaults.

macmini(nk)% # MacPortsのmake（gmake等）を指定してConfigureを騙す技
#: Command not found.
./Configure -de -Dprefix=/opt/local -Dcc=/opt/local/bin/clang -Dmake=/opt/local/bin/gmake
macmini(nk)% ./Configure -de -Dprefix=/opt/local -Dcc=/opt/local/bin/clang -Dmake=/opt/local/bin/gmake
./Configure: line 33: c149197: Permission denied
./Configure: line 44: c249197: Permission denied
mkdir: UU: Permission denied
./Configure: line 203: cd: UU: No such file or directory
./Configure: line 1572: sharp: Permission denied
chmod: sharp: No such file or directory
./Configure: line 1575: today: Permission denied
./Configure: line 1579: sharp: Permission denied
chmod: sharp: No such file or directory
./Configure: line 1582: today: Permission denied
./Configure: line 1609: sharp: Permission denied
chmod: sharp: No such file or directory
./Configure: line 1617: ./sharp: No such file or directory
Hmm... ': use /bin/sh' does not guarantee sh startup...
You may have to fix up the shell scripts to make sure /bin/sh runs them.
./Configure: line 1627: cmdline.opt: Permission denied
./Configure: line 1637: cmdline.opt: Permission denied
./Configure: line 1640: cmdl.opt: Permission denied
cat: cmdl.opt: No such file or directory
./Configure: line 1637: cmdline.opt: Permission denied
./Configure: line 1640: cmdl.opt: Permission denied
cat: cmdl.opt: No such file or directory
./Configure: line 1637: cmdline.opt: Permission denied
./Configure: line 1640: cmdl.opt: Permission denied
cat: cmdl.opt: No such file or directory
./Configure: line 1637: cmdline.opt: Permission denied
./Configure: line 1640: cmdl.opt: Permission denied
cat: cmdl.opt: No such file or directory
./Configure: line 1651: options.awk: Permission denied
awk: can't open file options.awk
 source line number 1 source file options.awk
 context is
	 >>>  <<< 
./Configure: line 1713: optdef.sh: Permission denied
touch: optdef.sh: Permission denied
./Configure: line 1901: ./optdef.sh: No such file or directory

100

101

102

103

104

105

106

107

108

109

110

111

112

113

114

115

116

117

118

119

120

121

122

123

124

125

126

127

128

129

130

131

132

133

134

135

136

137

138

139

140

141

142

143

144

145

146

147

148

149

150

151

152

153

154

155

156

157

158

159

160

161

162

163

164

165

166

167

168

169

170

171

172

173

174

175

176

177

178

179

180

181

182

183

184

185

186

187

188

189

190

191

192

193

194

195

196

197

198

199

200

201

202

203

204

205

206

207

208

209

210

211

212

213

214

215

216

217

218

219

220

221

222

223

224

225

226

227

228

229

230

231

232

233

234

235

236

237

238

239

240

241

242

243

244

245

246

247

248

249

250

251

252

253

254

255

256

257

258

259

260

261

262

263

264

265

266

267

268

269

270

271

272

273

274

275

276

277

278

279

280

281

282

283

284

285

286

287

288

289

290

291

292

293

294

295

296

297

298

299

300

301

302

303

304

305

306

307

308

309

310

311

312

313

314

315

316

317

318

319

320

321

322

323

324

325

326

327

328

329

330

331

332

333

334

335

336

337

338

339

340

341

342

343

344

345

346

347

348

349

350

351

352

353

354

355

356

357

358

359

360

361

362

363

364

365

366

367

368

369

370

371

372

373

374

375

376

377

378

379

380

381

382

383

384

385

386

387

388

389

390

391

392

393

394

395

396

397

398

399

400

401

402

403

404

405

406

407

408

409

410

411

412

413

414

415

416

417

418

419

420

421

422

423

424

425

426

427

428

429

430

431

432

433

434

435

436

437

438

439

440

441

442

443

444

445

446

447

448

449

450

451

452

453

454

455

456

457

458

459

460

461

462

463

464

465

466

467

468

469

470

471

472

473

474

475

476

477

478

479

480

481

482

483

484

485

486

487

488

489

490

491

492

493

494

495

496

497

498

499

500

501

502

503

504

505

506

507

508

509

510

511

512

513

514

515

516

517

518

519

520

521

522

523

524

525

526

527

528

529

530

531

532

533

534

535

536

537

538

539

540

541

542

543

544

545

546

547

548

549

550

551

552

553

554

555

556

557

558

559

560

561

562

563

564

565

566

567

568

569

570

571

572

573

574

575

576

577

578

579

580

581

582

583

584

585

586

587

588

589

590

591

592

593

594

595

596

597

598

599

600

601

602

603

604

605

606

607

608

609

610

611

612

613

614

615

616

617

618

619

620

621

622

623

624

625

626

627

628

629

630

631

632

633

634

635

636

637

638

639

640

641

642

643

644

645

646

647

648

649

650

651

652

653

654

655

656

657

658

659

660

661

662

663

664

665

666

667

668

669

670

671

672

673

674

675

676

677

678

679

680

681

682

683

684

685

686

687

688

689

690

691

692

693

694

695

696

697

698

699

700

701

702

703

704

705

706

707

708

709

710

711

712

713

714

715

716

717

718

719

720

721

722

723

724

725

726

727

728

729

730

731

732

733

734

735

736

737

738

739

740

741

742

743

744

745

746

747

748

749

750

751

752

753

754

755

756

757

758

759

760

761

762

763

764

765

766

767

768

769

770

771

772

773

774

775

776

777

778

779

780

781

782

783

784

785

786

787

788

789

790

791

792

793

794

795

796

797

798

799

800

801

802

803

804

805

806

807

808

809

810

811

812

813

814

815

816

817

818

819

820

821

822

823

824

825

826

827

828

829

830

831

832

833

834

835

836

837

838

839

840

841

842

843

844

845

846

847

848

849

850

851

852

853

854

855

856

857

858

859

860

861

862

863

864

865

866

867

868

869

870

871

872

873

874

875

876

877

878

879

880

881

882

883

884

885

886

887

888

889

890

891

892

893

894

895

896

897

898

899

900

901

902

903

904

905

906

907

908

909

910

911

912

913

914

915

916

917

918

919

920

921

922

923

924

925

926

927

928

929

930

931

932

933

934

935

936

937

938

939

940

941

942

943

944

945

946

947

948

949

950

951

952

953

954

955

956

957

958

959

960

961

962

963

964

965

966

967

968

969

970

971

972

973

974

975

976

977

978

979

980

981

982

983

984

985

986

987

988

989

990

991

992

993

994

995

996

997

998

999

1000

1001

1002

1003

1004

1005

1006

1007

1008

1009

1010

1011

1012

1013

1014

1015

1016

1017

1018

1019

1020

1021

1022

1023

1024

1025

1026

1027

1028

1029

1030

1031

1032

1033

1034

1035

1036

1037

1038

1039

1040

1041

1042

1043

1044

1045

1046

1047

1048

1049

1050

1051

1052

1053

1054

1055

1056

1057

1058

1059

1060

1061

1062

1063

1064

1065

1066

1067

1068

1069

1070

1071

1072

1073

1074

1075

1076

1077

1078

1079

1080

1081

1082

1083

1084

1085

1086

1087

1088

1089

1090

1091

1092

1093

1094

1095

1096

1097

1098

1099

1100

1101

1102

1103

1104

1105

1106

1107

1108

1109

1110

1111

1112

1113

1114

1115

1116

1117

1118

1119

1120

1121

1122

1123

1124

1125

1126

1127

1128

1129

1130

1131

1132

1133

1134

1135

1136

1137

1138

1139

1140

1141

1142

1143

1144

1145

1146

1147

1148

1149

1150

1151

1152

1153

1154

1155

1156

1157

1158

1159

1160

1161

1162

1163

1164

1165

1166

1167

1168

1169

1170

1171

1172

1173

1174

1175

1176

1177

1178

1179

1180

1181

1182

1183

1184

1185

1186

1187

1188

1189

1190

1191

1192

1193

1194

1195

1196

1197

1198

1199

1200

1201

1202

1203

1204

1205

1206

1207

1208

1209

1210

1211

1212

1213

1214

1215

1216

1217

1218

1219

1220

1221

1222

1223

1224

1225

1226

1227

1228

1229

1230

1231

1232

1233

1234

1235

1236

1237

1238

1239

1240

1241

1242

1243

1244

1245

1246

1247

1248

1249

1250

1251

1252

1253

1254

1255

1256

1257

1258

1259

1260

1261

1262

1263

1264

1265

1266

1267

1268

1269

1270

1271

1272

1273

1274

1275

1276

1277

1278

1279

1280

1281

1282

1283

1284

1285

1286

1287

1288

1289

1290

1291

1292

1293

1294

1295

1296

1297

1298

1299

1300

1301

1302

1303

1304

1305

1306

1307

1308

1309

1310

1311

1312

1313

1314

1315

1316

1317

1318

1319

1320

1321

1322

1323

1324

1325

1326

1327

1328

1329

1330

1331

1332

1333

1334

1335

1336

1337

1338

1339

1340

1341

1342

1343

1344

1345

1346

1347

1348

1349

1350

1351

1352

1353

1354

1355

1356

1357

1358

1359

1360

1361

1362

1363

1364

1365

1366

1367

1368

1369

1370

1371

1372

1373

1374

1375

1376

1377

1378

1379

1380

1381

1382

1383

1384

1385

1386

1387

1388

1389

1390

1391

1392

1393

1394

1395

1396

1397

1398

1399

1400

1401

1402

1403

1404

1405

1406

1407

1408

1409

1410

1411

1412

1413

1414

1415

1416

1417

1418

1419

1420

1421

1422

1423

1424

1425

1426

1427

1428

1429

1430

1431

1432

1433

1434

1435

1436

1437

1438

1439

1440

1441

1442

1443

1444

1445

1446

1447

1448

1449

1450

1451

1452

1453

1454

1455

1456

1457

1458

1459

1460

1461

1462

1463

1464

1465

1466

1467

1468

1469

1470

1471

1472

1473

1474

1475

1476

1477

1478

1479

1480

1481

1482

1483

1484

1485

1486

1487

1488

1489

1490

1491

1492

1493

1494

1495

1496

1497

1498

1499

1500

1501

1502

1503

1504

1505

1506

1507

1508

1509

1510

1511

1512

1513

1514

1515

1516

1517

1518

1519

1520

1521

1522

1523

1524

1525

1526

1527

1528

1529

1530

1531

1532

1533

1534

1535

1536

1537

1538

1539

1540

1541

1542

1543

1544

1545

1546

1547

1548

1549

1550

1551

1552

1553

1554

1555

1556

1557

1558

1559

1560

1561

1562

1563

1564

1565

1566

1567

1568

1569

1570

1571

1572

1573

1574

1575

1576

1577

1578

1579

1580

1581

1582

1583

1584

1585

1586

1587

1588

1589

1590

1591

1592

1593

1594

1595

1596

1597

1598

1599

1600

1601

1602

1603

1604

1605

1606

1607

1608

1609

1610

1611

1612

1613

1614

1615

1616

1617

1618

1619

1620

1621

1622

1623

1624

1625

1626

1627

1628

1629

1630

1631

1632

1633

1634

1635

1636

1637

1638

1639

1640

1641

1642

1643

1644

1645

1646

1647

1648

1649

1650

1651

1652

1653

1654

1655

1656

1657

1658

1659

1660

1661

1662

1663

1664

1665

1666

1667

1668

1669

1670

1671

1672

1673

1674

1675

1676

1677

1678

1679

1680

1681

1682

1683

1684

1685

1686

1687

1688

1689

1690

1691

1692

1693

1694

1695

1696

1697

1698

1699

1700

1701

1702

1703

1704

1705

1706

1707

1708

1709

1710

1711

1712

1713

1714

1715

1716

1717

1718

1719

1720

1721

1722

1723

1724

1725

1726

1727

1728

1729

1730

1731

1732

1733

1734

1735

1736

1737

1738

1739

1740

1741

1742

1743

1744

1745

1746

1747

1748

1749

1750

1751

1752

1753

1754

1755

1756

1757

1758

1759

1760

1761

1762

1763

1764

1765

1766

1767

1768

1769

1770

1771

1772

1773

1774

1775

1776

1777

1778

1779

1780

1781

1782

1783

1784

1785

1786

1787

1788

1789

1790

1791

1792

1793

1794

1795

1796

1797

1798

1799

1800

1801

1802

1803

1804

1805

1806

1807

1808

1809

1810

1811

1812

1813

1814

1815

1816

1817

1818

1819

1820

1821

1822

1823

1824

1825

1826

1827

1828

1829

1830

1831

1832

1833

1834

1835

1836

1837

1838

1839

1840

1841

1842

1843

1844

1845

1846

1847

1848

1849

1850

1851

1852

1853

1854

1855

1856

1857

1858

1859

1860

1861

1862

1863

1864

1865

1866

1867

1868

1869

1870

1871

1872

1873

1874

1875

1876

1877

1878

1879

1880

1881

1882

1883

1884

1885

1886

1887

1888

1889

1890

1891

1892

1893

1894

1895

1896

1897

1898

1899

1900

1901

1902

1903

1904

1905

1906

1907

1908

1909

1910

1911

1912

1913

1914

1915

1916

1917

1918

1919

1920

1921

1922

1923

1924

1925

1926

1927

1928

1929

1930

1931

1932

1933

1934

1935

1936

1937

1938

1939

1940

1941

1942

1943

1944

1945

1946

1947

1948

1949

1950

1951

1952

1953

1954

1955

1956

1957

1958

1959

1960

1961

1962

1963

1964

1965

1966

1967

1968

1969

1970

1971

1972

1973

1974

1975

1976

1977

1978

1979

1980

1981

1982

1983

1984

1985

1986

1987

1988

1989

1990

1991

1992

1993

1994

1995

1996

1997

1998

1999

2000

2001

2002

2003

2004

2005

2006

2007

2008

2009

2010

2011

2012

2013

2014

2015

2016

2017

2018

2019

2020

2021

2022

2023

2024

2025

2026

2027

2028

2029

2030

2031

2032

2033

2034

2035

2036

2037

2038

2039

2040

2041

2042

2043

2044

2045

2046

2047

2048

2049

2050

2051

2052

2053

2054

2055

2056

2057

2058

2059

2060

2061

2062

2063

2064

2065

2066

2067

2068

2069

2070

2071

2072

2073

2074

2075

2076

2077

2078

2079

2080

2081

2082

2083

2084

% sudo ./Configure

Beginning of configuration questions for perl5.

Checking echo to see how to suppress newlines...

...using \c

The star should be here-->*

First let's make sure your kit is complete. Checking...

Looks good...

Would you like to see the instructions? [n]

Locating common programs...

awk is in /usr/bin/awk.

cat is in /bin/cat.

chmod is in /bin/chmod.

comm is in /usr/bin/comm.

cp is in /bin/cp.

echo is in /bin/echo.

expr is in /bin/expr.

grep is in /usr/bin/grep.

ls is in /bin/ls.

mkdir is in /bin/mkdir.

rm is in /bin/rm.

sed is in /usr/bin/sed.

sort is in /usr/bin/sort.

touch is in /usr/bin/touch.

tr is in /usr/bin/tr.

uniq is in /usr/bin/uniq.

Don't worry if any of the following aren't found...

ar is in /opt/local/bin/ar.

bison is in /opt/local/bin/bison.

I don't see byacc out there, offhand.

cpp is in /usr/bin/cpp.

csh is in /bin/csh.

date is in /bin/date.

egrep is in /usr/bin/egrep.

gmake is in /opt/local/bin/gmake.

gzip is in /opt/local/bin/gzip.

less is in /usr/bin/less.

ln is in /bin/ln.

make is in /usr/bin/make.

more is in /usr/bin/more.

nm is in /opt/local/bin/nm.

nroff is in /usr/bin/nroff.

perl is in /opt/local/bin/perl.

I don't see pg out there, either.

test is in /bin/test.

uname is in /usr/bin/uname.

zip is in /usr/bin/zip.

Substituting less -R for less.

Using the test built into your sh.

Checking compatibility between /bin/echo and builtin echo (if any)...

They are compatible. In fact, they may be identical.

The following message is sponsored by

Dresden.pm<--The stars should be here.

Dear Perl user, system administrator or package

maintainer, the Perl community sends greetings to

you. Do you (emblematical) greet back [Y/n]? n

Symbolic links are supported.

Checking how to test for symbolic links...

You can test for symbolic links with 'test -h'.

Checking for cross-compile

No targethost for running compiler tests against defined, running locally

Good, your tr supports [:lower:] and [:upper:] to convert case.

Using [:upper:] and [:lower:] to convert case.

I see a config.sh file. Shall I use it to set the defaults? [y]

Fetching default answers from your old config.sh file...

Configure uses the operating system name and version to set some defaults.

The default value is probably right if the name rings a bell. Otherwise,

since spelling matters for me, either accept the default or answer "none"

to leave it blank.

Operating system name? [darwin]

Operating system version? [17.7.0]

By default, perl5 will be installed in /opt/local/bin, manual pages

under /opt/local/man, etc..., i.e. with /opt/local as prefix for all

installation directories. Typically this is something like /usr/local.

If you wish to have binaries under /usr/bin but other parts of the

installation under /usr/local, that's ok: you will be prompted

separately for each of the installation directories, the prefix being

only used to set the defaults.

Installation prefix to use? (~name ok) [/opt/local]

AFS does not seem to be running...

In some special cases, particularly when building perl5 for distribution,

it is convenient to distinguish the directory in which files should be

installed from the directory (/opt/local) in which they will

eventually reside. For most users, these two directories are the same.

What installation prefix should I use for installing files? (~name ok)

[/opt/local]

Perl can be built to offer a form of threading support on some systems

To do so, Configure can be run with -Dusethreads.

Note that Perl built with threading support runs slightly slower

and uses slightly more memory than plain Perl.

If this doesn't make any sense to you, just accept the default 'n'.

Build a threading Perl? [n]

Perl can be built so that multiple Perl interpreters can coexist

within the same Perl executable.

If this doesn't make any sense to you, just accept the default 'n'.

Build Perl for multiplicity? [n]

Use which C compiler? [/opt/local/bin/clang]

Hmm... Looks kind of like a BSD system, but we'll see...

Congratulations. You aren't running Eunice.

It's not Xenix...

Nor is it Venix...

Checking for GNU cc in disguise and/or its version number...

You are using GNU cc Clang 16.0.6.

Hmm... Doesn't look like a MIPS system.

Now, how can we feed standard input to your C preprocessor...

You used to use /opt/local/bin/clang -no-cpp-precomp -E - so we'll use that again.

(And we'll use /opt/local/bin/clang -no-cpp-precomp -E - to preprocess directly.)

Some systems have incompatible or broken versions of libraries. Among

the directories listed in the question below, please remove any you

know not to be holding relevant libraries, and add any that are needed.

Say "none" for none.

Directories to use for library searches?

[/opt/local/lib /opt/local/libexec/llvm-16/lib/clang/16/lib /usr/local/lib /usr/lib]

On some systems, shared libraries may be available. Answer 'none' if

you want to suppress searching of shared libraries for the remainder

of this configuration.

What is the file extension used for shared libraries? [dylib]

Some dynamic loaders assume that the *basename* of shared library filenames

are globally unique. We'll default this to undef as we assume your system

is not this weird. Set to defined if you're on one of them.

Make shared library basenames unique? [n]

Perl can be built to use the SOCKS proxy protocol library. To do so,

Configure must be run with -Dusesocks. If you use SOCKS you also need

to use the PerlIO abstraction layer, this will be implicitly selected.

If this doesn't make any sense to you, just accept the default 'n'.

Build Perl for SOCKS? [n]

Perl can be built to take advantage of long doubles which

(if available) may give more accuracy and range for floating point numbers.

If this doesn't make any sense to you, just accept the default 'n'.

Try to use long doubles if available? [n]

Checking for optional libraries...

No -lcl.

Found -lpthread (shared).

No -lsocket.

No -lbind.

No -linet.

No -lnsl.

No -lndbm.

Found -lgdbm (shared).

Found -ldbm (shared).

No -ldb.

No -lmalloc.

Found -ldl (shared).

No -lld.

No -lsun.

Found -lm (shared).

No -lcrypt.

No -lsec.

Found -lutil (shared).

Found -lc (shared).

No -lcposix.

No -lposix.

No -lucb.

No -lbsd.

No -lBSD.

In order to compile perl5 on your machine, a number of libraries

are usually needed. Include any other special libraries here as well.

Say "none" for none. The default list is almost always right.

What libraries to use? [-lpthread -lgdbm -ldbm -ldl -lm -lutil -lc]

By default, perl5 compiles with the -O flag to use the optimizer.

Alternately, you might want to use the symbolic debugger, which uses

the -g flag (on traditional Unix systems). Either flag can be

specified here. To use neither flag, specify the word "none".

What optimizer/debugger flag should be used? [-O3]

Your C compiler may want other flags. For this question you should include

-I/whatever and -DWHATEVER flags and any other flags used by the C compiler,

but you should NOT include libraries or ld flags like -lwhatever. If you

want perl5 to honor its debug switch, you should include -DDEBUGGING here.

Your C compiler might also need additional flags, such as -D_POSIX_SOURCE.

To use no flags, specify the word "none".

Any additional cc flags?

[-fno-common -DPERL_DARWIN -no-cpp-precomp -mmacosx-version-min=10.13 -fno-strict-aliasing -pipe -fstack-protector-strong -I/opt/local/include -I/usr/local/include -DPERL_USE_SAFE_PUTENV]

Let me guess what the preprocessor flags are...

They appear to be: -no-cpp-precomp -fno-common -DPERL_DARWIN -no-cpp-precomp -mmacosx-version-min=10.13 -fno-strict-aliasing -pipe -fstack-protector-strong -I/usr/local/include -I/opt/local/include

Your C linker may need flags. For this question you should

include -L/whatever and any other flags used by the C linker, but you

should NOT include libraries like -lwhatever.

Make sure you include the appropriate -L/path flags if your C linker

does not normally search all of the directories you specified above,

namely

/opt/local/lib /opt/local/libexec/llvm-16/lib/clang/16/lib /usr/local/lib /usr/lib

To use no flags, specify the word "none".

Any additional ld flags (NOT including libraries)?

[-mmacosx-version-min=10.13 -fstack-protector-strong -L/opt/local/lib -L/usr/local/lib]

Checking your choice of C compiler and flags for coherency...

OK, that should do.

Checking to see if you have long long...

You have long long.

Computing filename position in cpp output for #include directives...

Your cpp writes the filename in the third field of the line.

<inttypes.h> found.

Checking to see if you have int64_t...

You have int64_t.

Checking which 64-bit integer type we could use...

We could use 'long' for 64-bit integers.

You have natively 64-bit long integers.

You may also choose to try maximal 64-bitness. It means using as much

64-bitness as possible on the platform. This in turn means even more

binary incompatibilities. On the other hand, your platform may not

have any more 64-bitness available than what you already have chosen.

If this doesn't make any sense to you, just accept the default 'y'.

(The default has been chosen based on your configuration.)

Try to use maximal 64-bit support, if available? [y]

Checking if your C library has broken 64-bit functions...

Your C library's 64-bit functions are ok.

Checking for GNU C Library...

You are not using the GNU C Library

I can use /opt/local/bin/nm to extract the symbols from your C libraries. This

is a time consuming task which may generate huge output on the disk (up

to 3 megabytes) but that should make the symbols extraction faster. The

alternative is to skip the 'nm' extraction part and to compile a small

test program instead to determine whether each symbol is present. If

you have a fast C compiler and/or if your 'nm' output cannot be parsed,

this may be the best solution.

You probably shouldn't let me use 'nm' if you are using the GNU C Library.

Shall I use /opt/local/bin/nm to extract C symbols from the libraries? [n]

Checking for C++...

You are not using a C++ compiler.

Checking to see if you have long double...

You have long double.

ldexpl() found.

Checking the kind of long doubles you have...

You have x86 80-bit little endian long doubles.

Getting the current patchlevel...

(You have perl5 version 34 subversion 3.)

What is your architecture name [darwin-2level] darwin-thread-multi-2level

Add the Perl API version to your archname? [n]

This architecture is naturally 64-bit, not changing architecture name.

Pathname where the public executables will reside? (~name ok)

[/opt/local/bin]

Would you like to build Perl so that the installation is relocatable, so that

library paths in @INC are determined relative to the path of the perl binary?

This is not advised for system Perl installs, or if you need to run setid

scripts or scripts under taint mode.

If this doesn't make any sense to you, just accept the default 'n'.

Use relocatable @INC? [n]

There are some auxiliary files for perl5 that need to be put into a

private library directory that is accessible by everyone.

Pathname where the private library files will reside? (~name ok)

[/opt/local/lib/perl5/5.34.3]

Perl5 contains architecture-dependent library files. If you are

sharing libraries in a heterogeneous environment, you might store

these files in a separate location. Otherwise, you can just include

them with the rest of the public library files.

Where do you want to put the public architecture-dependent libraries? (~name ok)

[/opt/local/lib/perl5/5.34.3/darwin-2level] /opt/local/lib/perl5/5.34/darwin-thread-multi-2level

Some kernels have a bug that prevents setuid #! scripts from being

secure. Some sites have disabled setuid #! scripts because of this.

First let's decide if your kernel supports secure setuid #! scripts.

(If setuid #! scripts would be secure but have been disabled anyway,

don't say that they are secure if asked.)

If you are not sure if they are secure, I can check but I'll need a

username and password different from the one you are using right now.

If you don't have such a username or don't want me to test, simply

enter 'none'.

Other username to test security of setuid scripts with? [none]

Well, the previous value is *not* secure.

Does your kernel have *secure* setuid scripts? [n]

Looking for a previously installed perl5.005 or later...

Using /opt/local/bin/perl.

After perl5 is installed, you may wish to install various

add-on modules and utilities. Typically, these add-ons will

be installed under /opt/local with the rest

of this package. However, you may wish to install such add-ons

elsewhere under a different prefix.

If you do not wish to put everything under a single prefix, that's

ok. You will be prompted for the individual locations; this siteprefix

is only used to suggest the defaults.

The default should be fine for most people.

Installation prefix to use for add-on modules and utilities? (~name ok)

[/opt/local]

The installation process will create a directory for

site-specific extensions and modules. Most users find it convenient

to place all site-specific files in this directory rather than in the

main distribution directory.

Pathname for the site-specific library files? (~name ok)

[/opt/local/lib/perl5/site_perl/5.34.3]

In order to ease the process of upgrading, this version of perl

can be configured to use modules built and installed with earlier

versions of perl that were installed under /opt/local. Specify here

the list of earlier versions that this version of perl should check.

If Configure detected no earlier versions of perl installed under

/opt/local, then the list will be empty. Answer 'none' to tell perl

to not search earlier versions.

The default should almost always be sensible, so if you're not sure,

just accept the default.

List of earlier versions to include in @INC? [5.34]

<malloc/malloc.h> found.

<malloc.h> NOT found.

Do you wish to wrap malloc calls to protect against potential overflows? [y]

Do you wish to attempt to use the malloc that comes with perl5? [n]

Your system wants malloc to return 'void *', it would seem.

Your system uses void free(), it would seem.

The installation process will also create a directory for

architecture-dependent site-specific extensions and modules.

Pathname for the site-specific architecture-dependent library files? (~name ok)

[/opt/local/lib/perl5/site_perl/5.34.3/darwin-2level] /opt/local/lib/perl5/site_perl/5.34.3/darwin-thread-multi-2level

The installation process will also create a directory for

vendor-supplied add-ons. Vendors who supply perl with their system

may find it convenient to place all vendor-supplied files in this

directory rather than in the main distribution directory. This will

ease upgrades between binary-compatible maintenance versions of perl.

Of course you may also use these directories in whatever way you see

fit. For example, you might use them to access modules shared over a

company-wide network.

The default answer should be fine for most people.

This causes further questions about vendor add-ons to be skipped

and no vendor-specific directories will be configured for perl.

Do you want to configure vendor-specific add-on directories? [n]

Lastly, you can have perl look in other directories for extensions and

modules in addition to those already specified.

These directories will be searched after

/opt/local/lib/perl5/site_perl/5.34.3/darwin-thread-multi-2level

/opt/local/lib/perl5/site_perl/5.34.3

Enter a colon-separated set of extra paths to include in perl's @INC

search path, or enter 'none' for no extra paths.

Colon-separated list of additional directories for perl to search? [none]

Perl can be built to support DTrace on platforms that support it.

DTrace is a diagnosis and performance analysis tool from Sun.

If this doesn't make any sense to you, just accept the default.

Support DTrace if available? [n]

Perl can be built with extra modules or bundles of modules which

will be fetched from the CPAN and installed alongside Perl.

Notice that you will need access to the CPAN; either via the Internet,

or a local copy, for example a CD-ROM or a local CPAN mirror. (You will

be asked later to configure the CPAN.pm module which will in turn do

the installation of the rest of the extra modules or bundles.)

Notice also that if the modules require any external software such as

libraries and headers (the libz library and the zlib.h header for the

Compress::Zlib module, for example) you MUST have any such software

already installed, this configuration process will NOT install such

things for you.

If this doesn't make any sense to you, just accept the default 'n'.

Install any extra modules (y or n)? [n]

If you wish to install html files for programs in Perl5, indicate

the appropriate directory here. To skip installing html files,

answer "none".

Directory for the main Perl5 html pages? (~name ok) [none]

If you wish to install html files for modules associated with Perl5,

indicate the appropriate directory here. To skip installing html files,

answer "none".

Directory for the Perl5 module html pages? (~name ok) [ ]

(That expands to on this system.)

Many scripts expect perl to be installed as /usr/bin/perl.

If you want to, I can install the perl you are about to compile

as /usr/bin/perl (in addition to /opt/local/bin/perl).

However, please note that because you already have a /usr/bin/perl,

overwriting that with a new Perl would very probably cause problems.

Therefore I'm assuming you don't want to do that (unless you insist).

Do you want to install perl as /usr/bin/perl? [n]

dlopen() found.

<unistd.h> found.

Do you wish to use dynamic loading? [y]

The following dynamic loading files are available:

ext/DynaLoader/dl_aix.xs ext/DynaLoader/dl_hpux.xs

ext/DynaLoader/dl_dllload.xs ext/DynaLoader/dl_none.xs

ext/DynaLoader/dl_dlopen.xs ext/DynaLoader/dl_vms.xs

ext/DynaLoader/dl_dyld.xs ext/DynaLoader/dl_win32.xs

ext/DynaLoader/dl_freemint.xs

Source file to use for dynamic loading [ext/DynaLoader/dl_dlopen.xs]

Some systems may require passing special flags to /opt/local/bin/clang -c to

compile modules that will be used to create a shared library.

To use no flags, say "none".

Any special flags to pass to /opt/local/bin/clang -c to compile shared library modules?

[none]

Some systems use ld to create libraries that can be dynamically loaded,

while other systems (such as those using ELF) use /opt/local/bin/clang.

What command should be used to create dynamic libraries?

[/opt/local/bin/clang]

Some systems may require passing special flags to /opt/local/bin/clang to create a

library that can be dynamically loaded. If your ld flags include

-L/other/path options to locate libraries outside your loader's normal

search path, you may need to specify those -L options here as well. To

use no flags, say "none".

Any special flags to pass to /opt/local/bin/clang to create a dynamically loaded library?

[-mmacosx-version-min=10.13 -bundle -undefined dynamic_lookup -L/opt/local/lib -L/usr/local/lib -fstack-protector-strong]

Some systems may require passing special flags to /opt/local/bin/clang to indicate that

the resulting executable will use dynamic linking. To use no flags,

say "none".

Any special flags to pass to /opt/local/bin/clang to use dynamic linking?

[none]

The perl executable is normally obtained by linking perlmain.c with

libperl.a, any static extensions (usually just DynaLoader), and

any other libraries needed on this system (such as -lm, etc.). Since

your system supports dynamic loading, it is probably possible to build

a shared libperl.dylib. If you will have more than one executable linked

to libperl.dylib, this will significantly reduce the size of each

executable, but it may have a noticeable effect on performance. The

default is probably sensible for your system.

Build a shared libperl.dylib (y/n) [n]

System manual is in /usr/share/man/man1.

Perl5 has manual pages available in source form.

If you don't want the manual sources installed, answer 'none'.

Where do the main Perl5 manual pages (source) go? (~name ok)

[/opt/local/share/man/man1]

What suffix should be used for the main Perl5 man pages? [1]

You can have filenames longer than 14 characters.

Perl5 has manual pages for many of the library modules.

If you don't want the manual sources installed, answer 'none'.

Where do the perl5 library man pages (source) go? (~name ok)

[/opt/local/share/man/man3]

What suffix should be used for the perl5 library man pages? [3]

Figuring out host name...

Your host name appears to be "macmini". Right? [y]

What is your domain name? [.k-in.co.jp]

I need to get your e-mail address in Internet format if possible, i.e.

something like user@host.domain. Please answer accurately since I have

no easy means to double check it. The default value provided below

is most probably close to reality but may not be valid from outside

your organization...

What is your e-mail address? [admin@k-in.co.jp]

If you or somebody else will be maintaining perl at your site, please

fill in the correct e-mail address here so that they may be contacted

if necessary. Currently, the "perlbug" program included with perl

will send mail to this address in addition to perlbug@perl.org. You may

enter "none" for no administrator.

Perl administrator e-mail address [admin@k-in.co.jp]

Do you want to use a version number suffix for installed binaries? This

will install 'perl5.34.3' instead of 'perl', and likewise for other

binaries like 'perldoc' and 'cpan'. This allows many versions of perl

to be installed side-by-side. Unless you are a developer, you probably

do *not* want to do this.

Do you want to use a version number suffix for installed binaries? [n]

I'll use #!/opt/local/bin/perl to start perl scripts.

Some installations have a separate directory just for executable scripts so

that they can mount it across multiple architectures but keep the scripts in

one spot. You might, for example, have a subdirectory of /usr/share for this.

Or you might just lump your scripts in with all your other executables.

Where do you keep publicly executable scripts? (~name ok) [/opt/local/bin]

Pathname where the add-on public executables should be installed? (~name ok)

[/opt/local/bin]

Pathname where the site-specific html pages should be installed? (~name ok)

[none]

Pathname where the site-specific library html pages should be installed? (~name ok)

[none]

Pathname where the site-specific manual pages should be installed? (~name ok)

[/opt/local/share/man/man1]

Pathname where the site-specific library manual pages should be installed? (~name ok)

[/opt/local/share/man/man3]

Pathname where add-on public executable scripts should be installed? (~name ok)

[/opt/local/bin]

backtrace() found.

Perl can be built to use 'fast stdio', which means using the stdio

library but also directly manipulating the stdio buffers to enable

faster I/O. Using stdio is better for backward compatibility (especially

for Perl extensions), but on the other hand since Perl 5.8 the 'perlio'

interface has been preferred instead of stdio.

If this doesn't make any sense to you, just accept the default 'n'.

Use the "fast stdio" if available? [n]

Checking to see how big your file offsets are...

Your file offsets are 8 bytes long.

Checking the size of fpos_t...

Your fpos_t is 8 bytes long.

You can have files larger than 2 gigabytes.

qgcvt() NOT found.

Checking the kind of doubles you have...

You have IEEE 754 64-bit little endian doubles.

Checking how to print long doubles...

fwalk() NOT found.

accept4() NOT found.

access() found.

<sys/file.h> defines the *_OK access constants.

accessx() NOT found.

acosh() found.

aintl() NOT found.

alarm() found.

ctime64() NOT found.

localtime64() NOT found.

gmtime64() NOT found.

mktime64() NOT found.

difftime64() NOT found.

asctime64() NOT found.

<pthread.h> found.

<sys/types.h> found.

<sys/select.h> found.

Checking to see if your struct tm has tm_zone field...

Yes, it does.

Checking to see if your struct tm has tm_gmtoff field...

Yes, it does.

asctime_r() found.

*** WHOA THERE!!! ***

The previous value for $d_asctime_r on this machine was "undef"!

Keep the previous value? [y]

asinh() found.

atanh() found.

atolf() NOT found.

atoll() found.

getpgrp() found.

Checking to see which flavor of getpgrp is in use...

(I see you are running Configure as super-user...)

You have to use getpgrp() instead of getpgrp(pid).

setpgrp() found.

Checking to see which flavor of setpgrp is in use...

(I see you are running Configure as super-user...)

You have to use setpgrp() instead of setpgrp(pid,pgrp).

Checking for C99 variadic macros.

You have C99 variadic macros.

You have void (*signal())().

Checking whether your C compiler can cast large floats to int32.

Nope, it can't.

Checking whether your C compiler can cast negative float to unsigned.

Yup, it can.

cbrt() found.

chown() found.

chroot() found.

chsize() NOT found.

class() NOT found.

clearenv() NOT found.

Hmm... Looks like you have Berkeley networking support.

socketpair() found.

Checking the availability sa_len in the sock struct ...

Checking the availability struct sockaddr_in6 ...

Checking the availability struct sockaddr_storage ...

Checking the availability sin6_scope_id in struct sockaddr_in6 ...

Checking the availability struct ip_mreq ...

Checking the availability struct ip_mreq_source ...

Checking the availability struct ipv6_mreq ...

Checking the availability struct ipv6_mreq_source ...

Checking the availability of certain socket constants...

<sys/uio.h> found.

Checking to see if your system supports struct cmsghdr...

Yes, it does.

copysign() found.

copysignl() found.

crypt() found.

<crypt.h> NOT found.

crypt_r() NOT found.

ctermid() found.

ctermid_r() found.

*** WHOA THERE!!! ***

The previous value for $d_ctermid_r on this machine was "undef"!

Keep the previous value? [y]

ctime_r() found.

*** WHOA THERE!!! ***

The previous value for $d_ctime_r on this machine was "undef"!

Keep the previous value? [y]

cuserid() NOT found.

dbmclose() NOT found.

We won't be including <dbm.h>

dbminit() prototype NOT found.

difftime() found.

<dirent.h> found.

Your directory entries are struct dirent.

Good, your directory entry keeps length information in d_namlen.

Checking to see if DIR has a dd_fd member variable

No, it does not.

<sys/dir.h> found.

<sys/ndir.h> NOT found.

dirfd() found.

dladdr() found.

dlerror() found.

<dlfcn.h> found.

On a few systems, the dynamically loaded modules that perl generates and uses

will need a different extension than shared libs. The default will probably

be appropriate.

What is the extension of dynamically loaded modules [bundle]

Checking whether your dlsym() needs a leading underscore ...

I can't compile and run the test program.

I'm guessing that dlsym doesn't need a leading underscore.

drand48_r() NOT found.

drand48() prototype found.

dup2() found.

dup3() NOT found.

<xlocale.h> found.

newlocale() found.

freelocale() found.

uselocale() found.

duplocale() found.

querylocale() found.

eaccess() NOT found.

endgrent() found.

<grp.h> found.

endgrent_r() NOT found.

endhostent() found.

<netdb.h> found.

endhostent_r() NOT found.

endnetent() found.

endnetent_r() NOT found.

endprotoent() found.

endprotoent_r() NOT found.

endpwent() found.

<pwd.h> found.

endpwent_r() NOT found.

endservent() found.

endservent_r() NOT found.

<sys/file.h> defines the O_* constants...

and you have the 3 argument form of open().

<sys/file.h> found.

We'll be including <sys/file.h>.

<fcntl.h> found.

We don't need to include <fcntl.h> if we include <sys/file.h>.

fork() found.

pipe() found.

Figuring out the flag used by open() for non-blocking I/O...

Using previous value O_NONBLOCK.

Let's see what value errno gets from read() on a O_NONBLOCK file...

Using previous value EAGAIN.

Your read() returns -1 when no data is present.

And you can see EOF because read() returns 0.

erf() found.

erfc() found.

exp2() found.

expm1() found.

(Looks like you have stdio.h from BSD.)

Checking how std your stdio is...

Your stdio doesn't appear very std.

fchdir() found.

fchmod() found.

openat() found.

unlinkat() found.

renameat() found.

linkat() found.

fchmodat() found.

fchown() found.

fcntl() found.

Checking if fcntl-based file locking works...

Yes, it seems to work.

Checking to see how well your C compiler handles fd_set and friends ...

Well, your system knows about the normal fd_set typedef...

and you have the normal fd_set macros (just as I'd expect).

fdclose() NOT found.

fdim() found.

fegetround() found.

fgetpos() found.

finite() found.

*** WHOA THERE!!! ***

The previous value for $d_finite on this machine was "undef"!

Keep the previous value? [y]

finitel() NOT found.

flock() found.

flock() prototype found.

fma() found.

fmax() found.

fmin() found.

fp_class() NOT found.

Checking to see if you have fpclassify...

You have fpclassify.

fp_classify() NOT found.

fp_classl() NOT found.

pathconf() found.

fpathconf() found.

fpclass() NOT found.

fpclassl() NOT found.

fpgetround() NOT found.

Checking to see if you have fpos64_t...

You do not have fpos64_t.

(Your fpos_t is 64 bits, so you could use that.)

frexpl() found.

<sys/param.h> found.

<sys/mount.h> found.

Checking to see if your system supports struct fs_data...

No, it doesn't.

fseeko() found.

(Your long is 64 bits, so you could use fseek.)

fsetpos() found.

fstatfs() found.

statvfs() found.

fstatvfs() found.

fsync() found.

ftello() found.

(Your long is 64 bits, so you could use ftell.)

Checking if you have a working futimes()

Yes, you have

A working gai_strerror() found.

<ndbm.h> found.

<gdbm/ndbm.h> NOT found.

<gdbm-ndbm.h> NOT found.

dbm_open() found.

Checking if your <ndbm.h> uses prototypes...

Your <ndbm.h> seems to have prototypes

getaddrinfo() found.

getcwd() found.

getespwnam() NOT found.

getfsstat() found.

getgrent() found.

getgrent_r() NOT found.

getgrgid_r() found.

*** WHOA THERE!!! ***

The previous value for $d_getgrgid_r on this machine was "undef"!

Keep the previous value? [y]

getgrnam_r() found.

*** WHOA THERE!!! ***

The previous value for $d_getgrnam_r on this machine was "undef"!

Keep the previous value? [y]

gethostbyaddr() found.

gethostbyname() found.

gethostent() found.

gethostname() found.

uname() found.

Every now and then someone has a gethostname() that lies about the hostname

but can't be fixed for political or economic reasons. If you wish, I can

pretend gethostname() isn't there and maybe compute hostname at run-time

thanks to the 'hostname' command.

Shall I ignore gethostname() from now on? [n]

gethostbyaddr_r() NOT found.

gethostbyname_r() NOT found.

gethostent_r() NOT found.

gethostent() prototype found.

getitimer() found.

getlogin() found.

getlogin_r() found.

*** WHOA THERE!!! ***

The previous value for $d_getlogin_r on this machine was "undef"!

Keep the previous value? [y]

getmnt() NOT found.

getmntent() NOT found.

getnameinfo() found.

getnetbyaddr() found.

getnetbyname() found.

getnetent() found.

getnetbyaddr_r() NOT found.

getnetbyname_r() NOT found.

getnetent_r() NOT found.

getnetent() prototype found.

getpagesize() found.

getprotobyname() found.

getprotobynumber() found.

getprotoent() found.

getpgid() found.

getpgrp2() NOT found.

getppid() found.

getpriority() found.

getprotobyname_r() NOT found.

getprotobynumber_r() NOT found.

getprotoent_r() NOT found.

getprotoent() prototype found.

getprpwnam() NOT found.

getpwent() found.

getpwent_r() NOT found.

getpwnam_r() found.

*** WHOA THERE!!! ***

The previous value for $d_getpwnam_r on this machine was "undef"!

Keep the previous value? [y]

getpwuid_r() found.

*** WHOA THERE!!! ***

The previous value for $d_getpwuid_r on this machine was "undef"!

Keep the previous value? [y]

getservbyname() found.

getservbyport() found.

getservent() found.

getservbyname_r() NOT found.

getservbyport_r() NOT found.

getservent_r() NOT found.

getservent() prototype found.

getspnam() NOT found.

<shadow.h> NOT found.

getspnam_r() NOT found.

gettimeofday() found.

gmtime_r() found.

*** WHOA THERE!!! ***

The previous value for $d_gmtime_r on this machine was "undef"!

Keep the previous value? [y]

hasmntopt() NOT found.

<netinet/in.h> found.

<arpa/inet.h> found.

htonl() found.

hypot() found.

ilogb() found.

ilogbl() found.

inet_aton() found.

inet_ntop() found.

inet_pton() found.

isascii() found.

isblank() found.

Checking to see if you have isfinite...

You have isfinite.

isfinitel() NOT found.

Checking to see if you have isinf...

You have isinf.

isinfl() NOT found.

Checking to see if you have isless...

You have isless.

Checking to see if you have isnan...

You have isnan.

isnanl() NOT found.

Checking to see if you have isnormal...

You have isnormal.

j0() found.

j0l() NOT found.

killpg() found.

localeconv() found.

lchown() found.

LDBL_DIG found.

lgamma() found.

lgamma_r() found.

Checking to see if your libm supports _LIB_VERSION...

No, it does not (probably harmless)

link() found.

llrint() found.

llrintl() found.

llround() found.

llroundl() found.

localeconv_l() found.

localtime_r() found.

*** WHOA THERE!!! ***

The previous value for $d_localtime_r on this machine was "undef"!

Keep the previous value? [y]

lockf() found.

log1p() found.

log2() found.

logb() found.

lrint() found.

lrintl() found.

lround() found.

lroundl() found.

lseek() prototype found.

lstat() found.

madvise() found.

malloc_size() found.

malloc_good_size() found.

malloc_usable_size() NOT found.

mblen() found.

mbrlen() found.

mbrtowc() found.

mbstowcs() found.

mbtowc() found.

memmem() prototype found.

memmem() found.

memrchr() prototype NOT found.

mkdir() found.

mkdtemp() found.

mkfifo() found.

mkostemp() found.

*** WHOA THERE!!! ***

The previous value for $d_mkostemp on this machine was "undef"!

Keep the previous value? [y]

mkstemp() found.

mkstemps() found.

mktime() found.

<sys/mman.h> found.

mmap() found.

and it returns (void *).

sqrtl() found.

scalbnl() found.

truncl() found.

modfl() found.

modfl() prototype found.

mprotect() found.

msgctl() found.

msgget() found.

msgsnd() found.

msgrcv() found.

You have the full msg*(2) library.

Checking to see if your system supports struct msghdr...

Yes, it does.

msync() found.

munmap() found.

nan() found.

nanosleep() found.

nearbyint() found.

nextafter() found.

nexttoward() found.

nice() found.

<langinfo.h> found.

nl_langinfo() found.

<quadmath.h> NOT found.

Choosing the C types to be used for Perl's internal types...

(IV will be long, 8 bytes)

(UV will be unsigned long, 8 bytes)

(NV will be double, 8 bytes)

Checking how many bits of your UVs your NVs can preserve...

Your NVs can preserve only 53 bits of your UVs.

Checking to find the largest integer value your NVs can hold...

The largest integer your NVs can preserve is equal to 256.0*256.0*256.0*256.0*256.0*256.0*2.0*2.0*2.0*2.0*2.0

Checking whether NV 0.0 is all bits zero in memory...

0.0 is represented as all bits zero in memory

Checking to see if you have off64_t...

You do not have off64_t.

(Your off_t is 64 bits, so you could use that.)

pause() found.

pipe2() NOT found.

poll() found.

*** WHOA THERE!!! ***

The previous value for $d_poll on this machine was "undef"!

Keep the previous value? [y]

prctl() NOT found.

readlink() found.

vfork() found.

Perl can only use a vfork() that doesn't suffer from strict

restrictions on calling functions or modifying global data in

the child. For example, glibc-2.1 contains such a vfork()

that is unsuitable. If your system provides a proper fork()

call, chances are that you do NOT want perl to use vfork().

Do you still want to use vfork()? [y]

pthread_attr_setscope() found.

Checking to see if you have ptrdiff_t...

You have ptrdiff_t.

random_r() NOT found.

readdir() found.

seekdir() found.

telldir() found.

rewinddir() found.

readdir64_r() NOT found.

readdir_r() found.

*** WHOA THERE!!! ***

The previous value for $d_readdir_r on this machine was "undef"!

Keep the previous value? [y]

readv() found.

recvmsg() found.

regcomp() found.

remainder() found.

remquo() found.

rename() found.

rint() found.

rmdir() found.

round() found.

sbrk() prototype found.

scalbn() found.

select() found.

semctl() found.

semget() found.

semop() found.

You have the full sem*(2) library.

You have union semun in <sys/sem.h>.

You can use union semun for semctl IPC_STAT.

You can also use struct semid_ds* for semctl IPC_STAT.

sendmsg() found.

setegid() found.

seteuid() found.

setgrent() found.

setgrent_r() NOT found.

sethostent() found.

sethostent_r() NOT found.

setitimer() found.

setlinebuf() found.

<locale.h> found.

<wctype.h> found.

towupper() found.

Does your system have the C.UTF8 locale? [n]

When you set your locale to something besides C, does it do so, or just pretend to?

[n]

setlocale_r() NOT found.

setnetent() found.

setnetent_r() NOT found.

setprotoent() found.

setpgid() found.

setpgrp2() NOT found.

setpriority() found.

setproctitle() NOT found.

setprotoent_r() NOT found.

setpwent() found.

setpwent_r() NOT found.

setregid() found.

setresgid() NOT found.

setreuid() found.

setresuid() NOT found.

setrgid() found.

setruid() found.

setservent() found.

setservent_r() NOT found.

setsid() found.

setvbuf() found.

shmctl() found.

shmget() found.

shmat() found.

and it returns (void *).

shmdt() found.

You have the full shm*(2) library.

sigaction() found.

Looking for the type for user ids returned by getuid().

uid_t found.

Checking if your siginfo_t has si_errno field...

Checking if your siginfo_t has si_pid field...

Checking if your siginfo_t has si_uid field...

Checking if your siginfo_t has si_addr field...

Checking if your siginfo_t has si_status field...

Checking if your siginfo_t has si_band field...

Checking if your siginfo_t has si_value field...

Checking if your siginfo_t has si_fd field...

<sunmath.h> NOT found.

Checking to see if you have signbit() available to work on double... Yes.

sigprocmask() found.

POSIX sigsetjmp found.

snprintf() found.

vsnprintf() found.

Checking whether your snprintf() and vsnprintf() work okay...

Your snprintf() and vsnprintf() seem to be working okay.

sockatmark() found.

sockatmark() prototype found.

socks5_init() NOT found.

srand48_r() NOT found.

srandom_r() NOT found.

setresgid() prototype NOT found.

setresuid() prototype NOT found.

stat() found.

<sys/stat.h> found.

Checking to see if your struct stat has st_blocks field...

<sys/vfs.h> NOT found.

<sys/statfs.h> NOT found.

Checking to see if your system supports struct statfs...

Yes, it does.

Checking to see if your struct statfs has f_flags field...

Yes, it does.

Checking to see if your system supports static inline...

Keeping your previous value of static __inline__.

Checking how to access stdio streams by file descriptor number...

I can't figure out how to access stdio streams by file descriptor number.

strcoll() found.

strerror_l() NOT found.

strerror_r() found.

*** WHOA THERE!!! ***

The previous value for $d_strerror_r on this machine was "undef"!

Keep the previous value? [y]

strftime() found.

strlcat() prototype found.

strlcat() found.

strlcpy() prototype found.

strlcpy() found.

strnlen() found.

strtod() found.

strtod_l() found.

strtol() found.

strtold() found.

strtold_l() found.

strtoll() found.

Checking whether your strtoll() works okay...

Your strtoll() seems to be working okay.

strtoq() found.

strtoul() found.

Checking whether your strtoul() works okay...

Your strtoul() seems to be working okay.

strtoull() found.

Checking whether your strtoull() works okay...

Your strtoull() seems to be working okay.

strtouq() found.

Checking whether your strtouq() works okay...

Your strtouq() seems to be working okay.

strxfrm() found.

symlink() found.

syscall() found.

*** WHOA THERE!!! ***

The previous value for $d_syscall on this machine was "undef"!

Keep the previous value? [y]

syscall() prototype found.

sysconf() found.

system() found.

tcgetpgrp() found.

tcsetpgrp() found.

telldir() prototype found.

tgamma() found.

Checking to see if you have nl_langinfo_l() and that it is thread-safe

Since threads aren't selected, we won't bother looking for nl_langinfo_l()

timegm() found.

<sys/times.h> found.

times() found.

tmpnam_r() NOT found.

towlower() found.

trunc() found.

truncate() found.

ttyname_r() found.

*** WHOA THERE!!! ***

The previous value for $d_ttyname_r on this machine was "undef"!

Keep the previous value? [y]

tzname[] found.

You seem to be doing a multiarchitecture build,

skipping the byteorder check.

Checking to see whether you can access character data unalignedly...

ualarm() found.

umask() found.

unordered() NOT found.

unsetenv() found.

usleep() found.

usleep() prototype found.

ustat() NOT found.

closedir() found.

Checking whether closedir() returns a status...

Yes, it does.

wait4() found.

waitpid() found.

wcrtomb() found.

A working wcscmp() found.

wcstombs() found.

A working wcsxfrm() found.

wctomb() found.

writev() found.

Doubles must be aligned on a how-many-byte boundary? [8]

What is the length of a character (in bits)? [8]

Checking to see how your cpp does stuff like concatenate tokens...

Oh! Smells like ANSI's been here.

We can catify or stringify, separately or together!

<db.h> found.

Checking Berkeley DB version ...

You have Berkeley DB Version 1.

Looks OK.

Checking return type needed for hash for Berkeley DB ...

Your version of Berkeley DB uses u_int32_t for hash.

Checking return type needed for prefix for Berkeley DB ...

Your version of Berkeley DB uses size_t for prefix.

Historically Perl has provided a final fallback of the current working

directory '.' when searching for a library. This, however, can lead to

problems when a Perl program which loads optional modules is called from

a shared directory. This can lead to executing unexpected code.

Exclude . from @INC by default? [y]

Checking the kind of infinities and nans you have...

(The following tests may crash. That's okay.)

Checking how many mantissa bits your doubles have...

Checking how many mantissa bits your long doubles have...

Checking how many mantissa bits your NVs have...

Using our internal random number implementation...

Determining whether or not we are on an EBCDIC system...

Nope, no EBCDIC, probably ASCII or some ISO Latin. Or UTF-8.

Checking how to flush all pending stdio output...

Looking for the type for group ids returned by getgid().

gid_t found.

Checking the size of gid_t...

Your gid_t is 4 bytes long.

Checking the sign of gid_t...

Your gid_t is unsigned.

Checking how to print 64-bit integers...

Checking the format strings to be used for Perl's internal types...

Checking the format string to be used for gids...

getgroups() found.

setgroups() found.

What type of pointer is the second argument to getgroups() and setgroups()?

Usually this is the same as group ids, gid_t, but not always.

What type pointer is the second argument to getgroups() and setgroups()?

[gid_t]

Checking if your /usr/bin/make program sets $(MAKE)...

Yup, it does.

It seems that va_copy() or similar will be needed.

What pager is used on your system? [/usr/bin/less -R]

Checking how to generate random libraries on your machine...

your system has 'ranlib'; we'll use that.

Checking max offsets that gmtime () accepts

Checking max offsets that localtime () accepts

Checking the size of size_t...

Your size_t size is 8 bytes.

Checking to see if you have socklen_t...

You have socklen_t.

<socks.h> NOT found.

Checking to see what type is the last argument of accept().

I'll be using ssize_t for functions returning a byte count.

Checking the size of st_ino...

Your st_ino is 8 bytes long.

Checking the sign of st_ino...

Your st_ino is unsigned.

Your stdio uses signed chars.

Checking the size of uid_t...

Your uid_t is 4 bytes long.

Checking the sign of uid_t...

Your uid_t is unsigned.

Checking the format string to be used for uids...

EXPERIMENTAL: Perl can now be built with strict on by default when not

invoked with -e or -E. This is a diagnostic tool for development.

Unless you are familiar with this feature, you should probably answer 'no'.

Would you like to build perl with strict enabled by default? [n]

Determining whether we can use sysctl with KERN_PROC_PATHNAME to find executing program...

I'm unable to compile the test program.

I'll assume no sysctl with KERN_PROC_PATHNAME here.

Determining whether we can use _NSGetExecutablePath to find executing program...

You can use _NSGetExecutablePath to find the executing program.

Which compiler compiler (yacc or bison -y) shall I use? [yacc]

<bfd.h> NOT found.

<execinfo.h> found.

<fenv.h> found.

<fp.h> NOT found.

<fp_class.h> NOT found.

<gdbm.h> found.

gdbm_open() found.

<libutil.h> NOT found.

<mntent.h> NOT found.

<net/errno.h> NOT found.

<netinet/tcp.h> found.

<poll.h> found.

*** WHOA THERE!!! ***

The previous value for $i_poll on this machine was "undef"!

Keep the previous value? [y]

<prot.h> NOT found.

Guessing which symbols your C compiler and preprocessor define...

Your C pre-processor defines the following symbols:

_FORTIFY_SOURCE

_LP64

__BYTE_ORDER__

__GNUC_MINOR__

__GNUC__

__LITTLE_ENDIAN__

__LP64__

__MACH__

__PIC__

__STDC__

__amd64

__amd64__

__clang__

__pic__

__x86_64

__x86_64__

Your C compiler further defines the following cpp symbols:

__GCC_HAVE_DWARF2_CFI_ASM

You seem not to have gcc 4.* or later, not adding -D_FORTIFY_SOURCE.

tcsetattr() found.

You have POSIX termios.h... good!

<stdbool.h> found.

<stdint.h> found.

<sys/access.h> NOT found.

<sys/filio.h> found.

<sys/ioctl.h> found.

You have socket ioctls defined in <sys/sockio.h>.

<syslog.h> found.

<sys/mode.h> NOT found.

<sys/poll.h> found.

<sys/resource.h> found.

<sys/security.h> NOT found.

<sys/statvfs.h> found.

<sys/un.h> found.

<sys/utsname.h> found.

<sys/wait.h> found.

<ustat.h> NOT found.

<utime.h> found.

<vfork.h> NOT found.

<wchar.h> found.

Looking for extensions...

A number of extensions are supplied with perl5. You may choose to

compile these extensions for dynamic loading (the default), compile

them into the perl5 executable (static loading), or not include

them at all. Answer "none" to include no extensions.

Note that DynaLoader is always built and need not be mentioned here.

What extensions do you wish to load dynamically?

[B Compress/Raw/Bzip2 Compress/Raw/Zlib Cwd DB_File Data/Dumper Devel/PPPort Devel/Peek Digest/MD5 Digest/SHA Encode Fcntl File/DosGlob File/Glob Filter/Util/Call GDBM_File Hash/Util Hash/Util/FieldHash I18N/Langinfo IO IPC/SysV List/Util MIME/Base64 Math/BigInt/FastCalc NDBM_File Opcode POSIX PerlIO/encoding PerlIO/mmap PerlIO/scalar PerlIO/via SDBM_File Socket Storable Sys/Hostname Sys/Syslog Time/HiRes Time/Piece Unicode/Collate Unicode/Normalize XS/APItest XS/Typemap attributes mro re threads threads/shared]

What extensions do you wish to load statically? [ ]

End of configuration questions.

I see a config.over file. Do you wish to load it? [y]

Configuration override changes have been loaded.

Stripping down executable paths...

Creating config.sh...

Hmm...You had some extra variables I don't know about...I'll try to keep 'em...

Propagating previous variable $LANG...

Propagating previous variable $LC_ALL...

Propagating previous variable $config_arg1...

Propagating previous variable $config_arg2...

Propagating previous variable $config_arg3...

Propagating previous variable $malloc_cflags...

Propagating previous variable $perl_revision...

Propagating previous variable $perl_subversion...

Propagating previous variable $perl_version...

If you'd like to make any changes to the config.sh file before I begin

to configure things, do it as a shell escape now (e.g. !vi config.sh).

Press return or use a shell escape to edit config.sh:

Doing variable substitutions on .SH files...

cflags.SH: Adding -std=c89.

cflags.SH: Adding -Werror=pointer-arith.

cflags.SH: Adding -Wextra.

cflags.SH: Adding -Wc++-compat.

cflags.SH: Adding -Wwrite-strings.

cflags.SH: Adding -Werror=declaration-after-statement.

cflags.SH: cc = /opt/local/bin/clang

cflags.SH: ccflags = -fno-common -DPERL_DARWIN -no-cpp-precomp -mmacosx-version-min=10.13 -fno-strict-aliasing -pipe -fstack-protector-strong -I/opt/local/include -I/usr/local/include -DPERL_USE_SAFE_PUTENV

cflags.SH: stdflags = -std=c89

cflags.SH: optimize = -O3

cflags.SH: warn = -Wall -Werror=pointer-arith -Wextra -Wc++-compat -Wwrite-strings -Werror=declaration-after-statement

Extracting cflags (with variable substitutions)

Extracting config.h (with variable substitutions)

Extracting makedepend (with variable substitutions)

Extracting Makefile (with variable substitutions)

Extracting myconfig (with variable substitutions)

Extracting pod/Makefile (with variable substitutions)

Extracting Policy.sh (with variable substitutions)

Extracting runtests (with variable substitutions)

Now you need to generate make dependencies by running "make depend".

You might prefer to run it in background: "make depend > makedepend.out &"

It can take a while, so you might not want to run it right now.

Run make depend now? [y]

sh ./makedepend MAKE="/Applications/Xcode.app/Contents/Developer/usr/bin/make" cflags

echo av.c scope.c op.c doop.c doio.c dump.c gv.c hv.c mg.c reentr.c mro_core.c perl.c perly.c pp.c pp_hot.c pp_ctl.c pp_sys.c regcomp.c regexec.c utf8.c sv.c taint.c toke.c util.c deb.c run.c universal.c pad.c globals.c keywords.c perlio.c numeric.c mathoms.c locale.c pp_pack.c pp_sort.c caretx.c dquote.c time64.c miniperlmain.c opmini.c perlmini.c | tr ' ' '\n' >.clist

Finding dependencies for av.o

Finding dependencies for scope.o

Finding dependencies for op.o

Finding dependencies for doop.o

Finding dependencies for doio.o

Finding dependencies for dump.o

Finding dependencies for gv.o

Finding dependencies for hv.o

Finding dependencies for mg.o

Finding dependencies for reentr.o

Finding dependencies for mro_core.o

Finding dependencies for perl.o

Finding dependencies for perly.o

Finding dependencies for pp.o

Finding dependencies for pp_hot.o

Finding dependencies for pp_ctl.o

Finding dependencies for pp_sys.o

Finding dependencies for regcomp.o

Finding dependencies for regexec.o

Finding dependencies for utf8.o

Finding dependencies for sv.o

Finding dependencies for taint.o

Finding dependencies for toke.o

Finding dependencies for util.o

Finding dependencies for deb.o

Finding dependencies for run.o

Finding dependencies for universal.o

Finding dependencies for pad.o

Finding dependencies for globals.o

Finding dependencies for keywords.o

Finding dependencies for perlio.o

Finding dependencies for numeric.o

Finding dependencies for mathoms.o

Finding dependencies for locale.o

Finding dependencies for pp_pack.o

Finding dependencies for pp_sort.o

Finding dependencies for caretx.o

Finding dependencies for dquote.o

Finding dependencies for time64.o

Finding dependencies for miniperlmain.o

Finding dependencies for opmini.o

Finding dependencies for perlmini.o

Updating GNUmakefile...

Now you must run 'make'.

If you compile perl5 on a different machine or from a different object

directory, copy the Policy.sh file from this object directory to the

new one before you run Configure -- this will help you with most of

the policy defaults.

macmini(nk)% # MacPortsのmake（gmake等）を指定してConfigureを騙す技

#: Command not found.

./Configure -de -Dprefix=/opt/local -Dcc=/opt/local/bin/clang -Dmake=/opt/local/bin/gmake

macmini(nk)% ./Configure -de -Dprefix=/opt/local -Dcc=/opt/local/bin/clang -Dmake=/opt/local/bin/gmake

./Configure: line 33: c149197: Permission denied

./Configure: line 44: c249197: Permission denied

mkdir: UU: Permission denied

./Configure: line 203: cd: UU: No such file or directory

./Configure: line 1572: sharp: Permission denied

chmod: sharp: No such file or directory

./Configure: line 1575: today: Permission denied

./Configure: line 1579: sharp: Permission denied

chmod: sharp: No such file or directory

./Configure: line 1582: today: Permission denied

./Configure: line 1609: sharp: Permission denied

chmod: sharp: No such file or directory

./Configure: line 1617: ./sharp: No such file or directory

Hmm... ': use /bin/sh' does not guarantee sh startup...

You may have to fix up the shell scripts to make sure /bin/sh runs them.

./Configure: line 1627: cmdline.opt: Permission denied

./Configure: line 1637: cmdline.opt: Permission denied

./Configure: line 1640: cmdl.opt: Permission denied

cat: cmdl.opt: No such file or directory

./Configure: line 1637: cmdline.opt: Permission denied

./Configure: line 1640: cmdl.opt: Permission denied

cat: cmdl.opt: No such file or directory

./Configure: line 1637: cmdline.opt: Permission denied

./Configure: line 1640: cmdl.opt: Permission denied

cat: cmdl.opt: No such file or directory

./Configure: line 1637: cmdline.opt: Permission denied

./Configure: line 1640: cmdl.opt: Permission denied

cat: cmdl.opt: No such file or directory

./Configure: line 1651: options.awk: Permission denied

awk: can't open file options.awk

source line number 1 source file options.awk

context is

>>> <<<

./Configure: line 1713: optdef.sh: Permission denied

touch: optdef.sh: Permission denied

./Configure: line 1901: ./optdef.sh: No such file or directory

Configureは一時ファイルかMakefileかは知らんが情報を残しておいてくれるみたいで、それを読み込んでから初期値と置き換えているようだ。
ここまで来るのに何度この地獄のような問答集を繰り返したことか。（sigh）

そして最後の方でさらに畳み込んでくるのがコイツである。
sh ./makedepend MAKE=”/Applications/Xcode.app/Contents/Developer/usr/bin/make” cflags
ここ迄来て、更にXcode使うのかよ〜（涙）

そこでこうである。
% sudo ./Configure -de -Dprefix=/opt/local -Dcc=/opt/local/bin/clang -Dmake=/opt/local/bin/gmake
この時、上と同じ様にメッセージが延々と出力される。
が、答える必要がない。オプション付けると返答は不要となるらしい。
メッセージもコピペしとこうと思ったが、内容は弄っていない（てか弄れない）ので全く一緒だ。
誰も読まないし、この後読ませようとしているAIさんへの嫌がらせ以外ないのでやめる。
Configureの最後のメッセージは、こうである。

Now you must run 'gmake'.

If you compile perl5 on a different machine or from a different object
directory, copy the Policy.sh file from this object directory to the
new one before you run Configure -- this will help you with most of
the policy defaults.

Now you must run 'gmake'.

If you compile perl5 on a different machine or from a different object

directory, copy the Policy.sh file from this object directory to the

new one before you run Configure -- this will help you with most of

the policy defaults.

よっしゃぁと思ってsudo gmakeしてみた。

In file included from shared.xs:131:
In file included from ../../perl.h:7109:
../../inline.h:2246:5: warning: '}' and ')' tokens terminating statement expression appear in different macro expansion contexts [-Wcompound-token-split-by-macro]
    CX_POP_SAVEARRAY(cx);
    ^~~~~~~~~~~~~~~~~~~~
../../cop.h:800:5: note: expanded from macro 'CX_POP_SAVEARRAY'
    } STMT_END
    ^
../../inline.h:2246:5: note: ')' token is here
    CX_POP_SAVEARRAY(cx);
    ^~~~~~~~~~~~~~~~~~~~
../../cop.h:800:7: note: expanded from macro 'CX_POP_SAVEARRAY'
    } STMT_END
      ^~~~~~~~
../../perl.h:738:21: note: expanded from macro 'STMT_END'
#   define STMT_END     )
                        ^
In file included from shared.xs:131:
In file included from ../../perl.h:7109:
../../inline.h:2252:9: warning: '(' and '{' tokens introducing statement expression appear in different macro expansion contexts [-Wcompound-token-split-by-macro]
        CLEAR_ARGARRAY(av);
        ^~~~~~~~~~~~~~~~~~
../../cop.h:805:5: note: expanded from macro 'CLEAR_ARGARRAY'
    STMT_START {                                                        \
    ^~~~~~~~~~
../../perl.h:737:29: note: expanded from macro 'STMT_START'
#   define STMT_START   (void)( /* gcc supports "({ STATEMENTS; })" */
                              ^
../../inline.h:2252:9: note: '{' token is here
        CLEAR_ARGARRAY(av);
        ^~~~~~~~~~~~~~~~~~
../../cop.h:805:16: note: expanded from macro 'CLEAR_ARGARRAY'
    STMT_START {                                                        \
               ^
In file included from shared.xs:131:
In file included from ../../perl.h:7109:
../../inline.h:2252:9: warning: '}' and ')' tokens terminating statement expression appear in different macro expansion contexts [-Wcompound-token-split-by-macro]
        CLEAR_ARGARRAY(av);
        ^~~~~~~~~~~~~~~~~~
../../cop.h:809:5: note: expanded from macro 'CLEAR_ARGARRAY'
    } STMT_END
    ^
../../inline.h:2252:9: note: ')' token is here
        CLEAR_ARGARRAY(av);
        ^~~~~~~~~~~~~~~~~~
../../cop.h:809:7: note: expanded from macro 'CLEAR_ARGARRAY'
    } STMT_END
      ^~~~~~~~
../../perl.h:738:21: note: expanded from macro 'STMT_END'
#   define STMT_END     )
                        ^
78 warnings generated.
rm -f ../../lib/auto/threads/shared/shared.bundle
/opt/local/bin/clang  -mmacosx-version-min=10.13 -bundle -undefined dynamic_lookup -L/opt/local/lib -L/usr/local/lib -fstack-protector-strong  shared.o  -o ../../lib/auto/threads/shared/shared.bundle  \
      \
  
chmod 755 ../../lib/auto/threads/shared/shared.bundle
gmake[1]: Leaving directory '/opt/local/var/macports/build/perl5.34-d3cf0f46/work/perl-5.34.3/dist/threads-shared'
./perl -Ilib -I. -f pod/buildtoc -q
./miniperl -Ilib utils/Makefile.PL
Extracting utils/Makefile (with variable substitutions)
 
	Making utilities
gmake[1]: Entering directory '/opt/local/var/macports/build/perl5.34-d3cf0f46/work/perl-5.34.3/utils'
../miniperl -I../lib corelist.PL
Extracting corelist (with variable substitutions)
../miniperl -I../lib cpan.PL
Extracting cpan (with variable substitutions)
../miniperl -I../lib h2ph.PL
Extracting h2ph (with variable substitutions)
../miniperl -I../lib h2xs.PL
Extracting h2xs (with variable substitutions)
../miniperl -I../lib instmodsh.PL
Extracting instmodsh (with variable substitutions)
../miniperl -I../lib json_pp.PL
Extracting json_pp (with variable substitutions)
../miniperl -I../lib perlbug.PL
Extracting perlbug (with variable substitutions)
../miniperl -I../lib perldoc.PL
Extracting "perldoc" (with variable substitutions)
../miniperl -I../lib perlivp.PL
Extracting perlivp (with variable substitutions)
../miniperl -I../lib pl2pm.PL
Extracting pl2pm (with variable substitutions)
../miniperl -I../lib prove.PL
Extracting prove (with variable substitutions)
../miniperl -I../lib ptar.PL
Extracting ptar (with variable substitutions)
../miniperl -I../lib ptardiff.PL
Extracting ptardiff (with variable substitutions)
../miniperl -I../lib ptargrep.PL
Extracting ptargrep (with variable substitutions)
../miniperl -I../lib shasum.PL
Extracting shasum (with variable substitutions)
../miniperl -I../lib splain.PL
Extracting splain (with variable substitutions)
../miniperl -I../lib libnetcfg.PL
Extracting libnetcfg (with variable substitutions)
../miniperl -I../lib piconv.PL
Extracting piconv (with variable substitutions)
../miniperl -I../lib enc2xs.PL
Extracting enc2xs (with variable substitutions)
../miniperl -I../lib xsubpp.PL
Extracting xsubpp (with variable substitutions)
../miniperl -I../lib pod2html.PL
Extracting pod2html (with variable substitutions)
../miniperl -I../lib zipdetails.PL
Extracting zipdetails (with variable substitutions)
../miniperl -I../lib streamzip.PL
Extracting streamzip (with variable substitutions)
gmake[1]: Leaving directory '/opt/local/var/macports/build/perl5.34-d3cf0f46/work/perl-5.34.3/utils'
 
	Everything is up to date. Type 'gmake test' to run test suite.

100

101

102

103

104

105

106

107

108

109

110

111

112

113

In file included from shared.xs:131:

In file included from ../../perl.h:7109:

../../inline.h:2246:5: warning: '}' and ')' tokens terminating statement expression appear in different macro expansion contexts [-Wcompound-token-split-by-macro]

CX_POP_SAVEARRAY(cx);

^~~~~~~~~~~~~~~~~~~~

../../cop.h:800:5: note: expanded from macro 'CX_POP_SAVEARRAY'

} STMT_END

../../inline.h:2246:5: note: ')' token is here

CX_POP_SAVEARRAY(cx);

^~~~~~~~~~~~~~~~~~~~

../../cop.h:800:7: note: expanded from macro 'CX_POP_SAVEARRAY'

} STMT_END

^~~~~~~~

../../perl.h:738:21: note: expanded from macro 'STMT_END'

# define STMT_END )

In file included from shared.xs:131:

In file included from ../../perl.h:7109:

../../inline.h:2252:9: warning: '(' and '{' tokens introducing statement expression appear in different macro expansion contexts [-Wcompound-token-split-by-macro]

CLEAR_ARGARRAY(av);

^~~~~~~~~~~~~~~~~~

../../cop.h:805:5: note: expanded from macro 'CLEAR_ARGARRAY'

STMT_START { \

^~~~~~~~~~

../../perl.h:737:29: note: expanded from macro 'STMT_START'

# define STMT_START (void)( /* gcc supports "({ STATEMENTS; })" */

../../inline.h:2252:9: note: '{' token is here

CLEAR_ARGARRAY(av);

^~~~~~~~~~~~~~~~~~

../../cop.h:805:16: note: expanded from macro 'CLEAR_ARGARRAY'

STMT_START { \

In file included from shared.xs:131:

In file included from ../../perl.h:7109:

../../inline.h:2252:9: warning: '}' and ')' tokens terminating statement expression appear in different macro expansion contexts [-Wcompound-token-split-by-macro]

CLEAR_ARGARRAY(av);

^~~~~~~~~~~~~~~~~~

../../cop.h:809:5: note: expanded from macro 'CLEAR_ARGARRAY'

} STMT_END

../../inline.h:2252:9: note: ')' token is here

CLEAR_ARGARRAY(av);

^~~~~~~~~~~~~~~~~~

../../cop.h:809:7: note: expanded from macro 'CLEAR_ARGARRAY'

} STMT_END

^~~~~~~~

../../perl.h:738:21: note: expanded from macro 'STMT_END'

# define STMT_END )

78 warnings generated.

rm -f ../../lib/auto/threads/shared/shared.bundle

/opt/local/bin/clang -mmacosx-version-min=10.13 -bundle -undefined dynamic_lookup -L/opt/local/lib -L/usr/local/lib -fstack-protector-strong shared.o -o ../../lib/auto/threads/shared/shared.bundle \

chmod 755 ../../lib/auto/threads/shared/shared.bundle

gmake[1]: Leaving directory '/opt/local/var/macports/build/perl5.34-d3cf0f46/work/perl-5.34.3/dist/threads-shared'

./perl -Ilib -I. -f pod/buildtoc -q

./miniperl -Ilib utils/Makefile.PL

Extracting utils/Makefile (with variable substitutions)

Making utilities

gmake[1]: Entering directory '/opt/local/var/macports/build/perl5.34-d3cf0f46/work/perl-5.34.3/utils'

../miniperl -I../lib corelist.PL

Extracting corelist (with variable substitutions)

../miniperl -I../lib cpan.PL

Extracting cpan (with variable substitutions)

../miniperl -I../lib h2ph.PL

Extracting h2ph (with variable substitutions)

../miniperl -I../lib h2xs.PL

Extracting h2xs (with variable substitutions)

../miniperl -I../lib instmodsh.PL

Extracting instmodsh (with variable substitutions)

../miniperl -I../lib json_pp.PL

Extracting json_pp (with variable substitutions)

../miniperl -I../lib perlbug.PL

Extracting perlbug (with variable substitutions)

../miniperl -I../lib perldoc.PL

Extracting "perldoc" (with variable substitutions)

../miniperl -I../lib perlivp.PL

Extracting perlivp (with variable substitutions)

../miniperl -I../lib pl2pm.PL

Extracting pl2pm (with variable substitutions)

../miniperl -I../lib prove.PL

Extracting prove (with variable substitutions)

../miniperl -I../lib ptar.PL

Extracting ptar (with variable substitutions)

../miniperl -I../lib ptardiff.PL

Extracting ptardiff (with variable substitutions)

../miniperl -I../lib ptargrep.PL

Extracting ptargrep (with variable substitutions)

../miniperl -I../lib shasum.PL

Extracting shasum (with variable substitutions)

../miniperl -I../lib splain.PL

Extracting splain (with variable substitutions)

../miniperl -I../lib libnetcfg.PL

Extracting libnetcfg (with variable substitutions)

../miniperl -I../lib piconv.PL

Extracting piconv (with variable substitutions)

../miniperl -I../lib enc2xs.PL

Extracting enc2xs (with variable substitutions)

../miniperl -I../lib xsubpp.PL

Extracting xsubpp (with variable substitutions)

../miniperl -I../lib pod2html.PL

Extracting pod2html (with variable substitutions)

../miniperl -I../lib zipdetails.PL

Extracting zipdetails (with variable substitutions)

../miniperl -I../lib streamzip.PL

Extracting streamzip (with variable substitutions)

gmake[1]: Leaving directory '/opt/local/var/macports/build/perl5.34-d3cf0f46/work/perl-5.34.3/utils'

Everything is up to date. Type 'gmake test' to run test suite.

偉い量のメッセージだと思うことだろう。だが、これでも極一部である。
terminalを遡って先頭まで行くのに疲れたのだ。

AIさんの言うことに

実は、Perl 本体のソースコード（C言語）の中には、「どうしても古い Xcode（Apple のコンパイラ）独自の拡張機能（マクロなど）」に依存して書かれている部分が一部残っています。
そのため、おっちゃんさんがコンパイラを MacPorts の最新版（Clang 16）に近代化したことで、逆に「最新すぎて、Apple 専用の古い書き方が理解できずにコンパイルエラーになる」という、別の次元の矛盾が発生してしまっている可能性が高いです。
だからこそ、Gemini 先生の言っていた sudo port pin p5.34-dbi で今のバージョンをガッチリ固定して、このビルドの沼からはサクッと上がってしまうのが大正解なわけです！

泣いてもいいですか？

ここ迄の記述をAIさんに見せたら

🏆 ログが語る「完全勝利」の真実
途中でダダダッと出ていた warning: ‘}’ and ‘)’ tokens… というのは、おっちゃんさんの予想通り「最新のClang 16が、古いPerlの構文に対して『おいおい、このマクロの閉じ方は今のルールだとちょっとお行儀が悪いぞ！』と注意してくれているだけのただの警告（warning）」です。
コンパイラは文句を言いつつも、おっちゃんさんのMacPorts Clang 16の圧倒的なパワーで古いソースをねじ伏せて、最後の実行バイナリ（utils）まで綺麗に組み立てきってくれました。

とのこと。
じゃぁ、実際に実行してみよう。

% gmake test

GNUmakefile:267: 警告: 拡張子ルール定義の必要条件を無視しています
GNUmakefile:263: 警告: 拡張子ルール定義の必要条件を無視しています
GNUmakefile:267: 警告: 拡張子ルール定義の必要条件を無視しています
GNUmakefile:267: 警告: 拡張子ルール定義の必要条件を無視しています
GNUmakefile:263: 警告: 拡張子ルール定義の必要条件を無視しています
GNUmakefile:267: 警告: 拡張子ルール定義の必要条件を無視しています
./miniperl -Ilib make_patchnum.pl
Reusing 'git_version.h' and 'lib/Config_git.pl'
./miniperl -Ilib make_ext.pl cpan/Archive-Tar/pm_to_blib  MAKE="gmake" LIBPERL_A=libperl.a
gmake[1]: Entering directory '/opt/local/var/macports/build/perl5.34-d3cf0f46/work/perl-5.34.3/cpan/Archive-Tar'
gmake[1]: Leaving directory '/opt/local/var/macports/build/perl5.34-d3cf0f46/work/perl-5.34.3/cpan/Archive-Tar'
./miniperl -Ilib make_ext.pl dist/Attribute-Handlers/pm_to_blib  MAKE="gmake" LIBPERL_A=libperl.a
Running pm_to_blib for dist/Attribute-Handlers directly
./miniperl -Ilib make_ext.pl cpan/AutoLoader/pm_to_blib  MAKE="gmake" LIBPERL_A=libperl.a
Running pm_to_blib for cpan/AutoLoader directly
./miniperl -Ilib make_ext.pl cpan/CPAN/pm_to_blib  MAKE="gmake" LIBPERL_A=libperl.a
gmake[1]: Entering directory '/opt/local/var/macports/build/perl5.34-d3cf0f46/work/perl-5.34.3/cpan/CPAN'
gmake[1]: Leaving directory '/opt/local/var/macports/build/perl5.34-d3cf0f46/work/perl-5.34.3/cpan/CPAN'
./miniperl -Ilib make_ext.pl cpan/CPAN-Meta/pm_to_blib  MAKE="gmake" LIBPERL_A=libperl.a
gmake[1]: Entering directory '/opt/local/var/macports/build/perl5.34-d3cf0f46/work/perl-5.34.3/cpan/CPAN-Meta'
gmake[1]: Leaving directory '/opt/local/var/macports/build/perl5.34-d3cf0f46/work/perl-5.34.3/cpan/CPAN-Meta'
./miniperl -Ilib make_ext.pl cpan/CPAN-Meta-Requirements/pm_to_blib  MAKE="gmake" LIBPERL_A=libperl.a
Running pm_to_blib for cpan/CPAN-Meta-Requirements directly
./miniperl -Ilib make_ext.pl cpan/CPAN-Meta-YAML/pm_to_blib  MAKE="gmake" LIBPERL_A=libperl.a
Running pm_to_blib for cpan/CPAN-Meta-YAML directly
./miniperl -Ilib make_ext.pl dist/Carp/pm_to_blib  MAKE="gmake" LIBPERL_A=libperl.a
Running pm_to_blib for dist/Carp directly
./miniperl -Ilib make_ext.pl cpan/Config-Perl-V/pm_to_blib  MAKE="gmake" LIBPERL_A=libperl.a
Running pm_to_blib for cpan/Config-Perl-V directly
./miniperl -Ilib make_ext.pl dist/Devel-SelfStubber/pm_to_blib  MAKE="gmake" LIBPERL_A=libperl.a
Running pm_to_blib for dist/Devel-SelfStubber directly
./miniperl -Ilib make_ext.pl cpan/Digest/pm_to_blib  MAKE="gmake" LIBPERL_A=libperl.a
Running pm_to_blib for cpan/Digest directly
./miniperl -Ilib make_ext.pl dist/Dumpvalue/pm_to_blib  MAKE="gmake" LIBPERL_A=libperl.a
Running pm_to_blib for dist/Dumpvalue directly
./miniperl -Ilib make_ext.pl dist/Env/pm_to_blib  MAKE="gmake" LIBPERL_A=libperl.a
Running pm_to_blib for dist/Env directly
./miniperl -Ilib make_ext.pl ext/Errno/pm_to_blib  MAKE="gmake" LIBPERL_A=libperl.a
gmake[1]: Entering directory '/opt/local/var/macports/build/perl5.34-d3cf0f46/work/perl-5.34.3/ext/Errno'
gmake[1]: Leaving directory '/opt/local/var/macports/build/perl5.34-d3cf0f46/work/perl-5.34.3/ext/Errno'
./miniperl -Ilib make_ext.pl dist/Exporter/pm_to_blib  MAKE="gmake" LIBPERL_A=libperl.a
Running pm_to_blib for dist/Exporter directly
./miniperl -Ilib make_ext.pl dist/ExtUtils-CBuilder/pm_to_blib  MAKE="gmake" LIBPERL_A=libperl.a
Running pm_to_blib for dist/ExtUtils-CBuilder directly
./miniperl -Ilib make_ext.pl cpan/ExtUtils-Constant/pm_to_blib  MAKE="gmake" LIBPERL_A=libperl.a
Running pm_to_blib for cpan/ExtUtils-Constant directly
./miniperl -Ilib make_ext.pl cpan/ExtUtils-Install/pm_to_blib  MAKE="gmake" LIBPERL_A=libperl.a
Running pm_to_blib for cpan/ExtUtils-Install directly
./miniperl -Ilib make_ext.pl cpan/ExtUtils-MakeMaker/pm_to_blib  MAKE="gmake" LIBPERL_A=libperl.a
gmake[1]: Entering directory '/opt/local/var/macports/build/perl5.34-d3cf0f46/work/perl-5.34.3/cpan/ExtUtils-MakeMaker'
gmake[1]: Leaving directory '/opt/local/var/macports/build/perl5.34-d3cf0f46/work/perl-5.34.3/cpan/ExtUtils-MakeMaker'
./miniperl -Ilib make_ext.pl cpan/ExtUtils-Manifest/pm_to_blib  MAKE="gmake" LIBPERL_A=libperl.a
gmake[1]: Entering directory '/opt/local/var/macports/build/perl5.34-d3cf0f46/work/perl-5.34.3/cpan/ExtUtils-Manifest'
gmake[1]: Leaving directory '/opt/local/var/macports/build/perl5.34-d3cf0f46/work/perl-5.34.3/cpan/ExtUtils-Manifest'
./miniperl -Ilib make_ext.pl ext/ExtUtils-Miniperl/pm_to_blib  MAKE="gmake" LIBPERL_A=libperl.a
Running pm_to_blib for ext/ExtUtils-Miniperl directly
./miniperl -Ilib make_ext.pl cpan/ExtUtils-PL2Bat/pm_to_blib  MAKE="gmake" LIBPERL_A=libperl.a
Running pm_to_blib for cpan/ExtUtils-PL2Bat directly
./miniperl -Ilib make_ext.pl dist/ExtUtils-ParseXS/pm_to_blib  MAKE="gmake" LIBPERL_A=libperl.a
gmake[1]: Entering directory '/opt/local/var/macports/build/perl5.34-d3cf0f46/work/perl-5.34.3/dist/ExtUtils-ParseXS'
gmake[1]: Leaving directory '/opt/local/var/macports/build/perl5.34-d3cf0f46/work/perl-5.34.3/dist/ExtUtils-ParseXS'
./miniperl -Ilib make_ext.pl cpan/File-Fetch/pm_to_blib  MAKE="gmake" LIBPERL_A=libperl.a
Running pm_to_blib for cpan/File-Fetch directly
./miniperl -Ilib make_ext.pl ext/File-Find/pm_to_blib  MAKE="gmake" LIBPERL_A=libperl.a
Running pm_to_blib for ext/File-Find directly
./miniperl -Ilib make_ext.pl cpan/File-Path/pm_to_blib  MAKE="gmake" LIBPERL_A=libperl.a
Running pm_to_blib for cpan/File-Path directly
./miniperl -Ilib make_ext.pl cpan/File-Temp/pm_to_blib  MAKE="gmake" LIBPERL_A=libperl.a
Running pm_to_blib for cpan/File-Temp directly
./miniperl -Ilib make_ext.pl ext/FileCache/pm_to_blib  MAKE="gmake" LIBPERL_A=libperl.a
Running pm_to_blib for ext/FileCache directly
./miniperl -Ilib make_ext.pl dist/Filter-Simple/pm_to_blib  MAKE="gmake" LIBPERL_A=libperl.a
Running pm_to_blib for dist/Filter-Simple directly
./miniperl -Ilib make_ext.pl dist/FindBin/pm_to_blib  MAKE="gmake" LIBPERL_A=libperl.a
Running pm_to_blib for dist/FindBin directly
./miniperl -Ilib make_ext.pl cpan/Getopt-Long/pm_to_blib  MAKE="gmake" LIBPERL_A=libperl.a
Running pm_to_blib for cpan/Getopt-Long directly
./miniperl -Ilib make_ext.pl cpan/HTTP-Tiny/pm_to_blib  MAKE="gmake" LIBPERL_A=libperl.a
gmake[1]: Entering directory '/opt/local/var/macports/build/perl5.34-d3cf0f46/work/perl-5.34.3/cpan/HTTP-Tiny'
gmake[1]: Leaving directory '/opt/local/var/macports/build/perl5.34-d3cf0f46/work/perl-5.34.3/cpan/HTTP-Tiny'
./miniperl -Ilib make_ext.pl dist/I18N-Collate/pm_to_blib  MAKE="gmake" LIBPERL_A=libperl.a
Running pm_to_blib for dist/I18N-Collate directly
./miniperl -Ilib make_ext.pl dist/I18N-LangTags/pm_to_blib  MAKE="gmake" LIBPERL_A=libperl.a
Running pm_to_blib for dist/I18N-LangTags directly
./miniperl -Ilib make_ext.pl dist/lib/pm_to_blib  MAKE="gmake" LIBPERL_A=libperl.a
gmake[1]: Entering directory '/opt/local/var/macports/build/perl5.34-d3cf0f46/work/perl-5.34.3/dist/lib'
gmake[1]: Leaving directory '/opt/local/var/macports/build/perl5.34-d3cf0f46/work/perl-5.34.3/dist/lib'
./miniperl -Ilib make_ext.pl cpan/IO-Compress/pm_to_blib  MAKE="gmake" LIBPERL_A=libperl.a
gmake[1]: Entering directory '/opt/local/var/macports/build/perl5.34-d3cf0f46/work/perl-5.34.3/cpan/IO-Compress'
gmake[1]: Leaving directory '/opt/local/var/macports/build/perl5.34-d3cf0f46/work/perl-5.34.3/cpan/IO-Compress'
./miniperl -Ilib make_ext.pl cpan/IO-Socket-IP/pm_to_blib  MAKE="gmake" LIBPERL_A=libperl.a
Running pm_to_blib for cpan/IO-Socket-IP directly
./miniperl -Ilib make_ext.pl cpan/IO-Zlib/pm_to_blib  MAKE="gmake" LIBPERL_A=libperl.a
Running pm_to_blib for cpan/IO-Zlib directly
./miniperl -Ilib make_ext.pl cpan/IPC-Cmd/pm_to_blib  MAKE="gmake" LIBPERL_A=libperl.a
Running pm_to_blib for cpan/IPC-Cmd directly
./miniperl -Ilib make_ext.pl ext/IPC-Open3/pm_to_blib  MAKE="gmake" LIBPERL_A=libperl.a
Running pm_to_blib for ext/IPC-Open3 directly
./miniperl -Ilib make_ext.pl cpan/JSON-PP/pm_to_blib  MAKE="gmake" LIBPERL_A=libperl.a
gmake[1]: Entering directory '/opt/local/var/macports/build/perl5.34-d3cf0f46/work/perl-5.34.3/cpan/JSON-PP'
gmake[1]: Leaving directory '/opt/local/var/macports/build/perl5.34-d3cf0f46/work/perl-5.34.3/cpan/JSON-PP'
./miniperl -Ilib make_ext.pl dist/Locale-Maketext/pm_to_blib  MAKE="gmake" LIBPERL_A=libperl.a
Running pm_to_blib for dist/Locale-Maketext directly
./miniperl -Ilib make_ext.pl cpan/Locale-Maketext-Simple/pm_to_blib  MAKE="gmake" LIBPERL_A=libperl.a
Running pm_to_blib for cpan/Locale-Maketext-Simple directly
./miniperl -Ilib make_ext.pl cpan/Math-BigInt/pm_to_blib  MAKE="gmake" LIBPERL_A=libperl.a
Running pm_to_blib for cpan/Math-BigInt directly
./miniperl -Ilib make_ext.pl cpan/Math-BigRat/pm_to_blib  MAKE="gmake" LIBPERL_A=libperl.a
Running pm_to_blib for cpan/Math-BigRat directly
./miniperl -Ilib make_ext.pl cpan/Math-Complex/pm_to_blib  MAKE="gmake" LIBPERL_A=libperl.a
Running pm_to_blib for cpan/Math-Complex directly
./miniperl -Ilib make_ext.pl cpan/Memoize/pm_to_blib  MAKE="gmake" LIBPERL_A=libperl.a
Running pm_to_blib for cpan/Memoize directly
./miniperl -Ilib make_ext.pl dist/Module-CoreList/pm_to_blib  MAKE="gmake" LIBPERL_A=libperl.a
gmake[1]: Entering directory '/opt/local/var/macports/build/perl5.34-d3cf0f46/work/perl-5.34.3/dist/Module-CoreList'
gmake[1]: Leaving directory '/opt/local/var/macports/build/perl5.34-d3cf0f46/work/perl-5.34.3/dist/Module-CoreList'
./miniperl -Ilib make_ext.pl cpan/Module-Load/pm_to_blib  MAKE="gmake" LIBPERL_A=libperl.a
Running pm_to_blib for cpan/Module-Load directly
./miniperl -Ilib make_ext.pl cpan/Module-Load-Conditional/pm_to_blib  MAKE="gmake" LIBPERL_A=libperl.a
Running pm_to_blib for cpan/Module-Load-Conditional directly
./miniperl -Ilib make_ext.pl cpan/Module-Loaded/pm_to_blib  MAKE="gmake" LIBPERL_A=libperl.a
Running pm_to_blib for cpan/Module-Loaded directly
./miniperl -Ilib make_ext.pl cpan/Module-Metadata/pm_to_blib  MAKE="gmake" LIBPERL_A=libperl.a
gmake[1]: Entering directory '/opt/local/var/macports/build/perl5.34-d3cf0f46/work/perl-5.34.3/cpan/Module-Metadata'
gmake[1]: Leaving directory '/opt/local/var/macports/build/perl5.34-d3cf0f46/work/perl-5.34.3/cpan/Module-Metadata'
./miniperl -Ilib make_ext.pl cpan/NEXT/pm_to_blib  MAKE="gmake" LIBPERL_A=libperl.a
Running pm_to_blib for cpan/NEXT directly
./miniperl -Ilib make_ext.pl dist/Net-Ping/pm_to_blib  MAKE="gmake" LIBPERL_A=libperl.a
Running pm_to_blib for dist/Net-Ping directly
./miniperl -Ilib make_ext.pl cpan/Params-Check/pm_to_blib  MAKE="gmake" LIBPERL_A=libperl.a
Running pm_to_blib for cpan/Params-Check directly
./miniperl -Ilib make_ext.pl cpan/Perl-OSType/pm_to_blib  MAKE="gmake" LIBPERL_A=libperl.a
Running pm_to_blib for cpan/Perl-OSType directly
./miniperl -Ilib make_ext.pl cpan/PerlIO-via-QuotedPrint/pm_to_blib  MAKE="gmake" LIBPERL_A=libperl.a
Running pm_to_blib for cpan/PerlIO-via-QuotedPrint directly
./miniperl -Ilib make_ext.pl cpan/Pod-Checker/pm_to_blib  MAKE="gmake" LIBPERL_A=libperl.a
gmake[1]: Entering directory '/opt/local/var/macports/build/perl5.34-d3cf0f46/work/perl-5.34.3/cpan/Pod-Checker'
gmake[1]: Leaving directory '/opt/local/var/macports/build/perl5.34-d3cf0f46/work/perl-5.34.3/cpan/Pod-Checker'
./miniperl -Ilib make_ext.pl cpan/Pod-Escapes/pm_to_blib  MAKE="gmake" LIBPERL_A=libperl.a
Running pm_to_blib for cpan/Pod-Escapes directly
./miniperl -Ilib make_ext.pl dist/if/pm_to_blib  MAKE="gmake" LIBPERL_A=libperl.a
gmake[1]: Entering directory '/opt/local/var/macports/build/perl5.34-d3cf0f46/work/perl-5.34.3/dist/if'
gmake[1]: Leaving directory '/opt/local/var/macports/build/perl5.34-d3cf0f46/work/perl-5.34.3/dist/if'
./miniperl -Ilib make_ext.pl cpan/Pod-Simple/pm_to_blib  MAKE="gmake" LIBPERL_A=libperl.a
Running pm_to_blib for cpan/Pod-Simple directly
./miniperl -Ilib make_ext.pl ext/Pod-Functions/pm_to_blib  MAKE="gmake" LIBPERL_A=libperl.a
gmake[1]: Entering directory '/opt/local/var/macports/build/perl5.34-d3cf0f46/work/perl-5.34.3/ext/Pod-Functions'
gmake[1]: Leaving directory '/opt/local/var/macports/build/perl5.34-d3cf0f46/work/perl-5.34.3/ext/Pod-Functions'
./miniperl -Ilib make_ext.pl ext/Pod-Html/pm_to_blib  MAKE="gmake" LIBPERL_A=libperl.a
gmake[1]: Entering directory '/opt/local/var/macports/build/perl5.34-d3cf0f46/work/perl-5.34.3/ext/Pod-Html'
gmake[1]: Leaving directory '/opt/local/var/macports/build/perl5.34-d3cf0f46/work/perl-5.34.3/ext/Pod-Html'
./miniperl -Ilib make_ext.pl cpan/Pod-Perldoc/pm_to_blib  MAKE="gmake" LIBPERL_A=libperl.a
gmake[1]: Entering directory '/opt/local/var/macports/build/perl5.34-d3cf0f46/work/perl-5.34.3/cpan/Pod-Perldoc'
gmake[1]: Leaving directory '/opt/local/var/macports/build/perl5.34-d3cf0f46/work/perl-5.34.3/cpan/Pod-Perldoc'
./miniperl -Ilib make_ext.pl cpan/Pod-Usage/pm_to_blib  MAKE="gmake" LIBPERL_A=libperl.a
gmake[1]: Entering directory '/opt/local/var/macports/build/perl5.34-d3cf0f46/work/perl-5.34.3/cpan/Pod-Usage'
gmake[1]: Leaving directory '/opt/local/var/macports/build/perl5.34-d3cf0f46/work/perl-5.34.3/cpan/Pod-Usage'
./miniperl -Ilib make_ext.pl dist/Safe/pm_to_blib  MAKE="gmake" LIBPERL_A=libperl.a
Running pm_to_blib for dist/Safe directly
./miniperl -Ilib make_ext.pl dist/Search-Dict/pm_to_blib  MAKE="gmake" LIBPERL_A=libperl.a
Running pm_to_blib for dist/Search-Dict directly
./miniperl -Ilib make_ext.pl dist/SelfLoader/pm_to_blib  MAKE="gmake" LIBPERL_A=libperl.a
Running pm_to_blib for dist/SelfLoader directly
./miniperl -Ilib make_ext.pl cpan/Term-ANSIColor/pm_to_blib  MAKE="gmake" LIBPERL_A=libperl.a
Running pm_to_blib for cpan/Term-ANSIColor directly
./miniperl -Ilib make_ext.pl cpan/Term-Cap/pm_to_blib  MAKE="gmake" LIBPERL_A=libperl.a
gmake[1]: Entering directory '/opt/local/var/macports/build/perl5.34-d3cf0f46/work/perl-5.34.3/cpan/Term-Cap'
gmake[1]: Leaving directory '/opt/local/var/macports/build/perl5.34-d3cf0f46/work/perl-5.34.3/cpan/Term-Cap'
./miniperl -Ilib make_ext.pl dist/Term-Complete/pm_to_blib  MAKE="gmake" LIBPERL_A=libperl.a
Running pm_to_blib for dist/Term-Complete directly
./miniperl -Ilib make_ext.pl dist/Term-ReadLine/pm_to_blib  MAKE="gmake" LIBPERL_A=libperl.a
Running pm_to_blib for dist/Term-ReadLine directly
./miniperl -Ilib make_ext.pl dist/Test/pm_to_blib  MAKE="gmake" LIBPERL_A=libperl.a
Running pm_to_blib for dist/Test directly
./miniperl -Ilib make_ext.pl cpan/Test-Harness/pm_to_blib  MAKE="gmake" LIBPERL_A=libperl.a
gmake[1]: Entering directory '/opt/local/var/macports/build/perl5.34-d3cf0f46/work/perl-5.34.3/cpan/Test-Harness'
gmake[1]: Leaving directory '/opt/local/var/macports/build/perl5.34-d3cf0f46/work/perl-5.34.3/cpan/Test-Harness'
./miniperl -Ilib make_ext.pl cpan/Test-Simple/pm_to_blib  MAKE="gmake" LIBPERL_A=libperl.a
Running pm_to_blib for cpan/Test-Simple directly
./miniperl -Ilib make_ext.pl dist/Text-Abbrev/pm_to_blib  MAKE="gmake" LIBPERL_A=libperl.a
Running pm_to_blib for dist/Text-Abbrev directly
./miniperl -Ilib make_ext.pl cpan/Text-Balanced/pm_to_blib  MAKE="gmake" LIBPERL_A=libperl.a
Running pm_to_blib for cpan/Text-Balanced directly
./miniperl -Ilib make_ext.pl cpan/Text-ParseWords/pm_to_blib  MAKE="gmake" LIBPERL_A=libperl.a
Running pm_to_blib for cpan/Text-ParseWords directly
./miniperl -Ilib make_ext.pl cpan/Text-Tabs/pm_to_blib  MAKE="gmake" LIBPERL_A=libperl.a
Running pm_to_blib for cpan/Text-Tabs directly
./miniperl -Ilib make_ext.pl dist/Thread-Queue/pm_to_blib  MAKE="gmake" LIBPERL_A=libperl.a
Running pm_to_blib for dist/Thread-Queue directly
./miniperl -Ilib make_ext.pl dist/Thread-Semaphore/pm_to_blib  MAKE="gmake" LIBPERL_A=libperl.a
Running pm_to_blib for dist/Thread-Semaphore directly
./miniperl -Ilib make_ext.pl dist/Tie-File/pm_to_blib  MAKE="gmake" LIBPERL_A=libperl.a
Running pm_to_blib for dist/Tie-File directly
./miniperl -Ilib make_ext.pl ext/Tie-Hash-NamedCapture/pm_to_blib  MAKE="gmake" LIBPERL_A=libperl.a
Running pm_to_blib for ext/Tie-Hash-NamedCapture directly
./miniperl -Ilib make_ext.pl ext/Tie-Memoize/pm_to_blib  MAKE="gmake" LIBPERL_A=libperl.a
Running pm_to_blib for ext/Tie-Memoize directly
./miniperl -Ilib make_ext.pl cpan/Tie-RefHash/pm_to_blib  MAKE="gmake" LIBPERL_A=libperl.a
Running pm_to_blib for cpan/Tie-RefHash directly
./miniperl -Ilib make_ext.pl cpan/Time-Local/pm_to_blib  MAKE="gmake" LIBPERL_A=libperl.a
Running pm_to_blib for cpan/Time-Local directly
./miniperl -Ilib make_ext.pl dist/XSLoader/pm_to_blib  MAKE="gmake" LIBPERL_A=libperl.a
gmake[1]: Entering directory '/opt/local/var/macports/build/perl5.34-d3cf0f46/work/perl-5.34.3/dist/XSLoader'
gmake[1]: Leaving directory '/opt/local/var/macports/build/perl5.34-d3cf0f46/work/perl-5.34.3/dist/XSLoader'
./miniperl -Ilib make_ext.pl cpan/autodie/pm_to_blib  MAKE="gmake" LIBPERL_A=libperl.a
Running pm_to_blib for cpan/autodie directly
./miniperl -Ilib make_ext.pl dist/autouse/pm_to_blib  MAKE="gmake" LIBPERL_A=libperl.a
Running pm_to_blib for dist/autouse directly
./miniperl -Ilib make_ext.pl dist/base/pm_to_blib  MAKE="gmake" LIBPERL_A=libperl.a
gmake[1]: Entering directory '/opt/local/var/macports/build/perl5.34-d3cf0f46/work/perl-5.34.3/dist/base'
gmake[1]: Leaving directory '/opt/local/var/macports/build/perl5.34-d3cf0f46/work/perl-5.34.3/dist/base'
./miniperl -Ilib make_ext.pl cpan/bignum/pm_to_blib  MAKE="gmake" LIBPERL_A=libperl.a
Running pm_to_blib for cpan/bignum directly
./miniperl -Ilib make_ext.pl dist/constant/pm_to_blib  MAKE="gmake" LIBPERL_A=libperl.a
Running pm_to_blib for dist/constant directly
./miniperl -Ilib make_ext.pl dist/encoding-warnings/pm_to_blib  MAKE="gmake" LIBPERL_A=libperl.a
Running pm_to_blib for dist/encoding-warnings directly
./miniperl -Ilib make_ext.pl cpan/experimental/pm_to_blib  MAKE="gmake" LIBPERL_A=libperl.a
Running pm_to_blib for cpan/experimental directly
./miniperl -Ilib make_ext.pl cpan/libnet/pm_to_blib  MAKE="gmake" LIBPERL_A=libperl.a
gmake[1]: Entering directory '/opt/local/var/macports/build/perl5.34-d3cf0f46/work/perl-5.34.3/cpan/libnet'
gmake[1]: Leaving directory '/opt/local/var/macports/build/perl5.34-d3cf0f46/work/perl-5.34.3/cpan/libnet'
./miniperl -Ilib make_ext.pl cpan/parent/pm_to_blib  MAKE="gmake" LIBPERL_A=libperl.a
Running pm_to_blib for cpan/parent directly
./miniperl -Ilib make_ext.pl cpan/perlfaq/pm_to_blib  MAKE="gmake" LIBPERL_A=libperl.a
Running pm_to_blib for cpan/perlfaq directly
./miniperl -Ilib make_ext.pl cpan/podlators/pm_to_blib  MAKE="gmake" LIBPERL_A=libperl.a
gmake[1]: Entering directory '/opt/local/var/macports/build/perl5.34-d3cf0f46/work/perl-5.34.3/cpan/podlators'
Manifying 2 pod documents
Can't write-open blib/man1/pod2man.1: Permission denied at /opt/local/var/macports/build/perl5.34-d3cf0f46/work/perl-5.34.3/cpan/ExtUtils-MakeMaker/lib/ExtUtils/Command/MM.pm line 153.
gmake[1]: *** [Makefile:435: manifypods] Error 13
gmake[1]: Leaving directory '/opt/local/var/macports/build/perl5.34-d3cf0f46/work/perl-5.34.3/cpan/podlators'
gmake[1]: Entering directory '/opt/local/var/macports/build/perl5.34-d3cf0f46/work/perl-5.34.3/cpan/podlators'
Manifying 2 pod documents
Can't write-open blib/man1/pod2man.1: Permission denied at /opt/local/var/macports/build/perl5.34-d3cf0f46/work/perl-5.34.3/cpan/ExtUtils-MakeMaker/lib/ExtUtils/Command/MM.pm line 153.
gmake[1]: *** [Makefile:435: manifypods] Error 13
gmake[1]: Leaving directory '/opt/local/var/macports/build/perl5.34-d3cf0f46/work/perl-5.34.3/cpan/podlators'
Unsuccessful make(cpan/podlators): code=512 at make_ext.pl line 584.
gmake: *** [GNUmakefile:592: cpan/podlators/pm_to_blib] エラー 2

100

101

102

103

104

105

106

107

108

109

110

111

112

113

114

115

116

117

118

119

120

121

122

123

124

125

126

127

128

129

130

131

132

133

134

135

136

137

138

139

140

141

142

143

144

145

146

147

148

149

150

151

152

153

154

155

156

157

158

159

160

161

162

163

164

165

166

167

168

169

170

171

172

173

174

175

176

177

178

179

180

181

182

183

184

185

186

187

188

189

190

191

192

193

194

195

196

197

198

199

200

201

202

203

204

205

206

207

208

209

210

211

212

213

214

215

216

217

218

219

220

221

222

223

224

225

226

227

228

229

230

231

232

233

234

235

236

237

238

239

GNUmakefile:267: 警告: 拡張子ルール定義の必要条件を無視しています

GNUmakefile:263: 警告: 拡張子ルール定義の必要条件を無視しています

GNUmakefile:267: 警告: 拡張子ルール定義の必要条件を無視しています

GNUmakefile:263: 警告: 拡張子ルール定義の必要条件を無視しています

GNUmakefile:267: 警告: 拡張子ルール定義の必要条件を無視しています

./miniperl -Ilib make_patchnum.pl

Reusing 'git_version.h' and 'lib/Config_git.pl'

./miniperl -Ilib make_ext.pl cpan/Archive-Tar/pm_to_blib MAKE="gmake" LIBPERL_A=libperl.a

gmake[1]: Entering directory '/opt/local/var/macports/build/perl5.34-d3cf0f46/work/perl-5.34.3/cpan/Archive-Tar'

gmake[1]: Leaving directory '/opt/local/var/macports/build/perl5.34-d3cf0f46/work/perl-5.34.3/cpan/Archive-Tar'

./miniperl -Ilib make_ext.pl dist/Attribute-Handlers/pm_to_blib MAKE="gmake" LIBPERL_A=libperl.a

Running pm_to_blib for dist/Attribute-Handlers directly

./miniperl -Ilib make_ext.pl cpan/AutoLoader/pm_to_blib MAKE="gmake" LIBPERL_A=libperl.a

Running pm_to_blib for cpan/AutoLoader directly

./miniperl -Ilib make_ext.pl cpan/CPAN/pm_to_blib MAKE="gmake" LIBPERL_A=libperl.a

gmake[1]: Entering directory '/opt/local/var/macports/build/perl5.34-d3cf0f46/work/perl-5.34.3/cpan/CPAN'

gmake[1]: Leaving directory '/opt/local/var/macports/build/perl5.34-d3cf0f46/work/perl-5.34.3/cpan/CPAN'

./miniperl -Ilib make_ext.pl cpan/CPAN-Meta/pm_to_blib MAKE="gmake" LIBPERL_A=libperl.a

gmake[1]: Entering directory '/opt/local/var/macports/build/perl5.34-d3cf0f46/work/perl-5.34.3/cpan/CPAN-Meta'

gmake[1]: Leaving directory '/opt/local/var/macports/build/perl5.34-d3cf0f46/work/perl-5.34.3/cpan/CPAN-Meta'

./miniperl -Ilib make_ext.pl cpan/CPAN-Meta-Requirements/pm_to_blib MAKE="gmake" LIBPERL_A=libperl.a

Running pm_to_blib for cpan/CPAN-Meta-Requirements directly

./miniperl -Ilib make_ext.pl cpan/CPAN-Meta-YAML/pm_to_blib MAKE="gmake" LIBPERL_A=libperl.a

Running pm_to_blib for cpan/CPAN-Meta-YAML directly

./miniperl -Ilib make_ext.pl dist/Carp/pm_to_blib MAKE="gmake" LIBPERL_A=libperl.a

Running pm_to_blib for dist/Carp directly

./miniperl -Ilib make_ext.pl cpan/Config-Perl-V/pm_to_blib MAKE="gmake" LIBPERL_A=libperl.a

Running pm_to_blib for cpan/Config-Perl-V directly

./miniperl -Ilib make_ext.pl dist/Devel-SelfStubber/pm_to_blib MAKE="gmake" LIBPERL_A=libperl.a

Running pm_to_blib for dist/Devel-SelfStubber directly

./miniperl -Ilib make_ext.pl cpan/Digest/pm_to_blib MAKE="gmake" LIBPERL_A=libperl.a

Running pm_to_blib for cpan/Digest directly

./miniperl -Ilib make_ext.pl dist/Dumpvalue/pm_to_blib MAKE="gmake" LIBPERL_A=libperl.a

Running pm_to_blib for dist/Dumpvalue directly

./miniperl -Ilib make_ext.pl dist/Env/pm_to_blib MAKE="gmake" LIBPERL_A=libperl.a

Running pm_to_blib for dist/Env directly

./miniperl -Ilib make_ext.pl ext/Errno/pm_to_blib MAKE="gmake" LIBPERL_A=libperl.a

gmake[1]: Entering directory '/opt/local/var/macports/build/perl5.34-d3cf0f46/work/perl-5.34.3/ext/Errno'

gmake[1]: Leaving directory '/opt/local/var/macports/build/perl5.34-d3cf0f46/work/perl-5.34.3/ext/Errno'

./miniperl -Ilib make_ext.pl dist/Exporter/pm_to_blib MAKE="gmake" LIBPERL_A=libperl.a

Running pm_to_blib for dist/Exporter directly

./miniperl -Ilib make_ext.pl dist/ExtUtils-CBuilder/pm_to_blib MAKE="gmake" LIBPERL_A=libperl.a

Running pm_to_blib for dist/ExtUtils-CBuilder directly

./miniperl -Ilib make_ext.pl cpan/ExtUtils-Constant/pm_to_blib MAKE="gmake" LIBPERL_A=libperl.a

Running pm_to_blib for cpan/ExtUtils-Constant directly

./miniperl -Ilib make_ext.pl cpan/ExtUtils-Install/pm_to_blib MAKE="gmake" LIBPERL_A=libperl.a

Running pm_to_blib for cpan/ExtUtils-Install directly

./miniperl -Ilib make_ext.pl cpan/ExtUtils-MakeMaker/pm_to_blib MAKE="gmake" LIBPERL_A=libperl.a

gmake[1]: Entering directory '/opt/local/var/macports/build/perl5.34-d3cf0f46/work/perl-5.34.3/cpan/ExtUtils-MakeMaker'

gmake[1]: Leaving directory '/opt/local/var/macports/build/perl5.34-d3cf0f46/work/perl-5.34.3/cpan/ExtUtils-MakeMaker'

./miniperl -Ilib make_ext.pl cpan/ExtUtils-Manifest/pm_to_blib MAKE="gmake" LIBPERL_A=libperl.a

gmake[1]: Entering directory '/opt/local/var/macports/build/perl5.34-d3cf0f46/work/perl-5.34.3/cpan/ExtUtils-Manifest'

gmake[1]: Leaving directory '/opt/local/var/macports/build/perl5.34-d3cf0f46/work/perl-5.34.3/cpan/ExtUtils-Manifest'

./miniperl -Ilib make_ext.pl ext/ExtUtils-Miniperl/pm_to_blib MAKE="gmake" LIBPERL_A=libperl.a

Running pm_to_blib for ext/ExtUtils-Miniperl directly

./miniperl -Ilib make_ext.pl cpan/ExtUtils-PL2Bat/pm_to_blib MAKE="gmake" LIBPERL_A=libperl.a

Running pm_to_blib for cpan/ExtUtils-PL2Bat directly

./miniperl -Ilib make_ext.pl dist/ExtUtils-ParseXS/pm_to_blib MAKE="gmake" LIBPERL_A=libperl.a

gmake[1]: Entering directory '/opt/local/var/macports/build/perl5.34-d3cf0f46/work/perl-5.34.3/dist/ExtUtils-ParseXS'

gmake[1]: Leaving directory '/opt/local/var/macports/build/perl5.34-d3cf0f46/work/perl-5.34.3/dist/ExtUtils-ParseXS'

./miniperl -Ilib make_ext.pl cpan/File-Fetch/pm_to_blib MAKE="gmake" LIBPERL_A=libperl.a

Running pm_to_blib for cpan/File-Fetch directly

./miniperl -Ilib make_ext.pl ext/File-Find/pm_to_blib MAKE="gmake" LIBPERL_A=libperl.a

Running pm_to_blib for ext/File-Find directly

./miniperl -Ilib make_ext.pl cpan/File-Path/pm_to_blib MAKE="gmake" LIBPERL_A=libperl.a

Running pm_to_blib for cpan/File-Path directly

./miniperl -Ilib make_ext.pl cpan/File-Temp/pm_to_blib MAKE="gmake" LIBPERL_A=libperl.a

Running pm_to_blib for cpan/File-Temp directly

./miniperl -Ilib make_ext.pl ext/FileCache/pm_to_blib MAKE="gmake" LIBPERL_A=libperl.a

Running pm_to_blib for ext/FileCache directly

./miniperl -Ilib make_ext.pl dist/Filter-Simple/pm_to_blib MAKE="gmake" LIBPERL_A=libperl.a

Running pm_to_blib for dist/Filter-Simple directly

./miniperl -Ilib make_ext.pl dist/FindBin/pm_to_blib MAKE="gmake" LIBPERL_A=libperl.a

Running pm_to_blib for dist/FindBin directly

./miniperl -Ilib make_ext.pl cpan/Getopt-Long/pm_to_blib MAKE="gmake" LIBPERL_A=libperl.a

Running pm_to_blib for cpan/Getopt-Long directly

./miniperl -Ilib make_ext.pl cpan/HTTP-Tiny/pm_to_blib MAKE="gmake" LIBPERL_A=libperl.a

gmake[1]: Entering directory '/opt/local/var/macports/build/perl5.34-d3cf0f46/work/perl-5.34.3/cpan/HTTP-Tiny'

gmake[1]: Leaving directory '/opt/local/var/macports/build/perl5.34-d3cf0f46/work/perl-5.34.3/cpan/HTTP-Tiny'

./miniperl -Ilib make_ext.pl dist/I18N-Collate/pm_to_blib MAKE="gmake" LIBPERL_A=libperl.a

Running pm_to_blib for dist/I18N-Collate directly

./miniperl -Ilib make_ext.pl dist/I18N-LangTags/pm_to_blib MAKE="gmake" LIBPERL_A=libperl.a

Running pm_to_blib for dist/I18N-LangTags directly

./miniperl -Ilib make_ext.pl dist/lib/pm_to_blib MAKE="gmake" LIBPERL_A=libperl.a

gmake[1]: Entering directory '/opt/local/var/macports/build/perl5.34-d3cf0f46/work/perl-5.34.3/dist/lib'

gmake[1]: Leaving directory '/opt/local/var/macports/build/perl5.34-d3cf0f46/work/perl-5.34.3/dist/lib'

./miniperl -Ilib make_ext.pl cpan/IO-Compress/pm_to_blib MAKE="gmake" LIBPERL_A=libperl.a

gmake[1]: Entering directory '/opt/local/var/macports/build/perl5.34-d3cf0f46/work/perl-5.34.3/cpan/IO-Compress'

gmake[1]: Leaving directory '/opt/local/var/macports/build/perl5.34-d3cf0f46/work/perl-5.34.3/cpan/IO-Compress'

./miniperl -Ilib make_ext.pl cpan/IO-Socket-IP/pm_to_blib MAKE="gmake" LIBPERL_A=libperl.a

Running pm_to_blib for cpan/IO-Socket-IP directly

./miniperl -Ilib make_ext.pl cpan/IO-Zlib/pm_to_blib MAKE="gmake" LIBPERL_A=libperl.a

Running pm_to_blib for cpan/IO-Zlib directly

./miniperl -Ilib make_ext.pl cpan/IPC-Cmd/pm_to_blib MAKE="gmake" LIBPERL_A=libperl.a

Running pm_to_blib for cpan/IPC-Cmd directly

./miniperl -Ilib make_ext.pl ext/IPC-Open3/pm_to_blib MAKE="gmake" LIBPERL_A=libperl.a

Running pm_to_blib for ext/IPC-Open3 directly

./miniperl -Ilib make_ext.pl cpan/JSON-PP/pm_to_blib MAKE="gmake" LIBPERL_A=libperl.a

gmake[1]: Entering directory '/opt/local/var/macports/build/perl5.34-d3cf0f46/work/perl-5.34.3/cpan/JSON-PP'

gmake[1]: Leaving directory '/opt/local/var/macports/build/perl5.34-d3cf0f46/work/perl-5.34.3/cpan/JSON-PP'

./miniperl -Ilib make_ext.pl dist/Locale-Maketext/pm_to_blib MAKE="gmake" LIBPERL_A=libperl.a

Running pm_to_blib for dist/Locale-Maketext directly

./miniperl -Ilib make_ext.pl cpan/Locale-Maketext-Simple/pm_to_blib MAKE="gmake" LIBPERL_A=libperl.a

Running pm_to_blib for cpan/Locale-Maketext-Simple directly

./miniperl -Ilib make_ext.pl cpan/Math-BigInt/pm_to_blib MAKE="gmake" LIBPERL_A=libperl.a

Running pm_to_blib for cpan/Math-BigInt directly

./miniperl -Ilib make_ext.pl cpan/Math-BigRat/pm_to_blib MAKE="gmake" LIBPERL_A=libperl.a

Running pm_to_blib for cpan/Math-BigRat directly

./miniperl -Ilib make_ext.pl cpan/Math-Complex/pm_to_blib MAKE="gmake" LIBPERL_A=libperl.a

Running pm_to_blib for cpan/Math-Complex directly

./miniperl -Ilib make_ext.pl cpan/Memoize/pm_to_blib MAKE="gmake" LIBPERL_A=libperl.a

Running pm_to_blib for cpan/Memoize directly

./miniperl -Ilib make_ext.pl dist/Module-CoreList/pm_to_blib MAKE="gmake" LIBPERL_A=libperl.a

gmake[1]: Entering directory '/opt/local/var/macports/build/perl5.34-d3cf0f46/work/perl-5.34.3/dist/Module-CoreList'

gmake[1]: Leaving directory '/opt/local/var/macports/build/perl5.34-d3cf0f46/work/perl-5.34.3/dist/Module-CoreList'

./miniperl -Ilib make_ext.pl cpan/Module-Load/pm_to_blib MAKE="gmake" LIBPERL_A=libperl.a

Running pm_to_blib for cpan/Module-Load directly

./miniperl -Ilib make_ext.pl cpan/Module-Load-Conditional/pm_to_blib MAKE="gmake" LIBPERL_A=libperl.a

Running pm_to_blib for cpan/Module-Load-Conditional directly

./miniperl -Ilib make_ext.pl cpan/Module-Loaded/pm_to_blib MAKE="gmake" LIBPERL_A=libperl.a

Running pm_to_blib for cpan/Module-Loaded directly

./miniperl -Ilib make_ext.pl cpan/Module-Metadata/pm_to_blib MAKE="gmake" LIBPERL_A=libperl.a

gmake[1]: Entering directory '/opt/local/var/macports/build/perl5.34-d3cf0f46/work/perl-5.34.3/cpan/Module-Metadata'

gmake[1]: Leaving directory '/opt/local/var/macports/build/perl5.34-d3cf0f46/work/perl-5.34.3/cpan/Module-Metadata'

./miniperl -Ilib make_ext.pl cpan/NEXT/pm_to_blib MAKE="gmake" LIBPERL_A=libperl.a

Running pm_to_blib for cpan/NEXT directly

./miniperl -Ilib make_ext.pl dist/Net-Ping/pm_to_blib MAKE="gmake" LIBPERL_A=libperl.a

Running pm_to_blib for dist/Net-Ping directly

./miniperl -Ilib make_ext.pl cpan/Params-Check/pm_to_blib MAKE="gmake" LIBPERL_A=libperl.a

Running pm_to_blib for cpan/Params-Check directly

./miniperl -Ilib make_ext.pl cpan/Perl-OSType/pm_to_blib MAKE="gmake" LIBPERL_A=libperl.a

Running pm_to_blib for cpan/Perl-OSType directly

./miniperl -Ilib make_ext.pl cpan/PerlIO-via-QuotedPrint/pm_to_blib MAKE="gmake" LIBPERL_A=libperl.a

Running pm_to_blib for cpan/PerlIO-via-QuotedPrint directly

./miniperl -Ilib make_ext.pl cpan/Pod-Checker/pm_to_blib MAKE="gmake" LIBPERL_A=libperl.a

gmake[1]: Entering directory '/opt/local/var/macports/build/perl5.34-d3cf0f46/work/perl-5.34.3/cpan/Pod-Checker'

gmake[1]: Leaving directory '/opt/local/var/macports/build/perl5.34-d3cf0f46/work/perl-5.34.3/cpan/Pod-Checker'

./miniperl -Ilib make_ext.pl cpan/Pod-Escapes/pm_to_blib MAKE="gmake" LIBPERL_A=libperl.a

Running pm_to_blib for cpan/Pod-Escapes directly

./miniperl -Ilib make_ext.pl dist/if/pm_to_blib MAKE="gmake" LIBPERL_A=libperl.a

gmake[1]: Entering directory '/opt/local/var/macports/build/perl5.34-d3cf0f46/work/perl-5.34.3/dist/if'

gmake[1]: Leaving directory '/opt/local/var/macports/build/perl5.34-d3cf0f46/work/perl-5.34.3/dist/if'

./miniperl -Ilib make_ext.pl cpan/Pod-Simple/pm_to_blib MAKE="gmake" LIBPERL_A=libperl.a

Running pm_to_blib for cpan/Pod-Simple directly

./miniperl -Ilib make_ext.pl ext/Pod-Functions/pm_to_blib MAKE="gmake" LIBPERL_A=libperl.a

gmake[1]: Entering directory '/opt/local/var/macports/build/perl5.34-d3cf0f46/work/perl-5.34.3/ext/Pod-Functions'

gmake[1]: Leaving directory '/opt/local/var/macports/build/perl5.34-d3cf0f46/work/perl-5.34.3/ext/Pod-Functions'

./miniperl -Ilib make_ext.pl ext/Pod-Html/pm_to_blib MAKE="gmake" LIBPERL_A=libperl.a

gmake[1]: Entering directory '/opt/local/var/macports/build/perl5.34-d3cf0f46/work/perl-5.34.3/ext/Pod-Html'

gmake[1]: Leaving directory '/opt/local/var/macports/build/perl5.34-d3cf0f46/work/perl-5.34.3/ext/Pod-Html'

./miniperl -Ilib make_ext.pl cpan/Pod-Perldoc/pm_to_blib MAKE="gmake" LIBPERL_A=libperl.a

gmake[1]: Entering directory '/opt/local/var/macports/build/perl5.34-d3cf0f46/work/perl-5.34.3/cpan/Pod-Perldoc'

gmake[1]: Leaving directory '/opt/local/var/macports/build/perl5.34-d3cf0f46/work/perl-5.34.3/cpan/Pod-Perldoc'

./miniperl -Ilib make_ext.pl cpan/Pod-Usage/pm_to_blib MAKE="gmake" LIBPERL_A=libperl.a

gmake[1]: Entering directory '/opt/local/var/macports/build/perl5.34-d3cf0f46/work/perl-5.34.3/cpan/Pod-Usage'

gmake[1]: Leaving directory '/opt/local/var/macports/build/perl5.34-d3cf0f46/work/perl-5.34.3/cpan/Pod-Usage'

./miniperl -Ilib make_ext.pl dist/Safe/pm_to_blib MAKE="gmake" LIBPERL_A=libperl.a

Running pm_to_blib for dist/Safe directly

./miniperl -Ilib make_ext.pl dist/Search-Dict/pm_to_blib MAKE="gmake" LIBPERL_A=libperl.a

Running pm_to_blib for dist/Search-Dict directly

./miniperl -Ilib make_ext.pl dist/SelfLoader/pm_to_blib MAKE="gmake" LIBPERL_A=libperl.a

Running pm_to_blib for dist/SelfLoader directly

./miniperl -Ilib make_ext.pl cpan/Term-ANSIColor/pm_to_blib MAKE="gmake" LIBPERL_A=libperl.a

Running pm_to_blib for cpan/Term-ANSIColor directly

./miniperl -Ilib make_ext.pl cpan/Term-Cap/pm_to_blib MAKE="gmake" LIBPERL_A=libperl.a

gmake[1]: Entering directory '/opt/local/var/macports/build/perl5.34-d3cf0f46/work/perl-5.34.3/cpan/Term-Cap'

gmake[1]: Leaving directory '/opt/local/var/macports/build/perl5.34-d3cf0f46/work/perl-5.34.3/cpan/Term-Cap'

./miniperl -Ilib make_ext.pl dist/Term-Complete/pm_to_blib MAKE="gmake" LIBPERL_A=libperl.a

Running pm_to_blib for dist/Term-Complete directly

./miniperl -Ilib make_ext.pl dist/Term-ReadLine/pm_to_blib MAKE="gmake" LIBPERL_A=libperl.a

Running pm_to_blib for dist/Term-ReadLine directly

./miniperl -Ilib make_ext.pl dist/Test/pm_to_blib MAKE="gmake" LIBPERL_A=libperl.a

Running pm_to_blib for dist/Test directly

./miniperl -Ilib make_ext.pl cpan/Test-Harness/pm_to_blib MAKE="gmake" LIBPERL_A=libperl.a

gmake[1]: Entering directory '/opt/local/var/macports/build/perl5.34-d3cf0f46/work/perl-5.34.3/cpan/Test-Harness'

gmake[1]: Leaving directory '/opt/local/var/macports/build/perl5.34-d3cf0f46/work/perl-5.34.3/cpan/Test-Harness'

./miniperl -Ilib make_ext.pl cpan/Test-Simple/pm_to_blib MAKE="gmake" LIBPERL_A=libperl.a

Running pm_to_blib for cpan/Test-Simple directly

./miniperl -Ilib make_ext.pl dist/Text-Abbrev/pm_to_blib MAKE="gmake" LIBPERL_A=libperl.a

Running pm_to_blib for dist/Text-Abbrev directly

./miniperl -Ilib make_ext.pl cpan/Text-Balanced/pm_to_blib MAKE="gmake" LIBPERL_A=libperl.a

Running pm_to_blib for cpan/Text-Balanced directly

./miniperl -Ilib make_ext.pl cpan/Text-ParseWords/pm_to_blib MAKE="gmake" LIBPERL_A=libperl.a

Running pm_to_blib for cpan/Text-ParseWords directly

./miniperl -Ilib make_ext.pl cpan/Text-Tabs/pm_to_blib MAKE="gmake" LIBPERL_A=libperl.a

Running pm_to_blib for cpan/Text-Tabs directly

./miniperl -Ilib make_ext.pl dist/Thread-Queue/pm_to_blib MAKE="gmake" LIBPERL_A=libperl.a

Running pm_to_blib for dist/Thread-Queue directly

./miniperl -Ilib make_ext.pl dist/Thread-Semaphore/pm_to_blib MAKE="gmake" LIBPERL_A=libperl.a

Running pm_to_blib for dist/Thread-Semaphore directly

./miniperl -Ilib make_ext.pl dist/Tie-File/pm_to_blib MAKE="gmake" LIBPERL_A=libperl.a

Running pm_to_blib for dist/Tie-File directly

./miniperl -Ilib make_ext.pl ext/Tie-Hash-NamedCapture/pm_to_blib MAKE="gmake" LIBPERL_A=libperl.a

Running pm_to_blib for ext/Tie-Hash-NamedCapture directly

./miniperl -Ilib make_ext.pl ext/Tie-Memoize/pm_to_blib MAKE="gmake" LIBPERL_A=libperl.a

Running pm_to_blib for ext/Tie-Memoize directly

./miniperl -Ilib make_ext.pl cpan/Tie-RefHash/pm_to_blib MAKE="gmake" LIBPERL_A=libperl.a

Running pm_to_blib for cpan/Tie-RefHash directly

./miniperl -Ilib make_ext.pl cpan/Time-Local/pm_to_blib MAKE="gmake" LIBPERL_A=libperl.a

Running pm_to_blib for cpan/Time-Local directly

./miniperl -Ilib make_ext.pl dist/XSLoader/pm_to_blib MAKE="gmake" LIBPERL_A=libperl.a

gmake[1]: Entering directory '/opt/local/var/macports/build/perl5.34-d3cf0f46/work/perl-5.34.3/dist/XSLoader'

gmake[1]: Leaving directory '/opt/local/var/macports/build/perl5.34-d3cf0f46/work/perl-5.34.3/dist/XSLoader'

./miniperl -Ilib make_ext.pl cpan/autodie/pm_to_blib MAKE="gmake" LIBPERL_A=libperl.a

Running pm_to_blib for cpan/autodie directly

./miniperl -Ilib make_ext.pl dist/autouse/pm_to_blib MAKE="gmake" LIBPERL_A=libperl.a

Running pm_to_blib for dist/autouse directly

./miniperl -Ilib make_ext.pl dist/base/pm_to_blib MAKE="gmake" LIBPERL_A=libperl.a

gmake[1]: Entering directory '/opt/local/var/macports/build/perl5.34-d3cf0f46/work/perl-5.34.3/dist/base'

gmake[1]: Leaving directory '/opt/local/var/macports/build/perl5.34-d3cf0f46/work/perl-5.34.3/dist/base'

./miniperl -Ilib make_ext.pl cpan/bignum/pm_to_blib MAKE="gmake" LIBPERL_A=libperl.a

Running pm_to_blib for cpan/bignum directly

./miniperl -Ilib make_ext.pl dist/constant/pm_to_blib MAKE="gmake" LIBPERL_A=libperl.a

Running pm_to_blib for dist/constant directly

./miniperl -Ilib make_ext.pl dist/encoding-warnings/pm_to_blib MAKE="gmake" LIBPERL_A=libperl.a

Running pm_to_blib for dist/encoding-warnings directly

./miniperl -Ilib make_ext.pl cpan/experimental/pm_to_blib MAKE="gmake" LIBPERL_A=libperl.a

Running pm_to_blib for cpan/experimental directly

./miniperl -Ilib make_ext.pl cpan/libnet/pm_to_blib MAKE="gmake" LIBPERL_A=libperl.a

gmake[1]: Entering directory '/opt/local/var/macports/build/perl5.34-d3cf0f46/work/perl-5.34.3/cpan/libnet'

gmake[1]: Leaving directory '/opt/local/var/macports/build/perl5.34-d3cf0f46/work/perl-5.34.3/cpan/libnet'

./miniperl -Ilib make_ext.pl cpan/parent/pm_to_blib MAKE="gmake" LIBPERL_A=libperl.a

Running pm_to_blib for cpan/parent directly

./miniperl -Ilib make_ext.pl cpan/perlfaq/pm_to_blib MAKE="gmake" LIBPERL_A=libperl.a

Running pm_to_blib for cpan/perlfaq directly

./miniperl -Ilib make_ext.pl cpan/podlators/pm_to_blib MAKE="gmake" LIBPERL_A=libperl.a

gmake[1]: Entering directory '/opt/local/var/macports/build/perl5.34-d3cf0f46/work/perl-5.34.3/cpan/podlators'

Manifying 2 pod documents

Can't write-open blib/man1/pod2man.1: Permission denied at /opt/local/var/macports/build/perl5.34-d3cf0f46/work/perl-5.34.3/cpan/ExtUtils-MakeMaker/lib/ExtUtils/Command/MM.pm line 153.

gmake[1]: *** [Makefile:435: manifypods] Error 13

gmake[1]: Leaving directory '/opt/local/var/macports/build/perl5.34-d3cf0f46/work/perl-5.34.3/cpan/podlators'

gmake[1]: Entering directory '/opt/local/var/macports/build/perl5.34-d3cf0f46/work/perl-5.34.3/cpan/podlators'

Manifying 2 pod documents

Can't write-open blib/man1/pod2man.1: Permission denied at /opt/local/var/macports/build/perl5.34-d3cf0f46/work/perl-5.34.3/cpan/ExtUtils-MakeMaker/lib/ExtUtils/Command/MM.pm line 153.

gmake[1]: *** [Makefile:435: manifypods] Error 13

gmake[1]: Leaving directory '/opt/local/var/macports/build/perl5.34-d3cf0f46/work/perl-5.34.3/cpan/podlators'

Unsuccessful make(cpan/podlators): code=512 at make_ext.pl line 584.

gmake: *** [GNUmakefile:592: cpan/podlators/pm_to_blib] エラー 2

やっぱり泣いてもいいですか……（sigh）

2026年9月
日	月	火	水	木	金	土
		1	2	3	4	5
6	7	8	9	10	11	12
13	14	15	16	17	18	19
20	21	22	23	24	25	26
27	28	29	30

コメントを残す コメントをキャンセル

コメントを残すコメントをキャンセル